VPKBIET | Baramati

R & D Cell

Objectives

To promote research and multidisciplinary projects.

To monitor and address the issues related to research and development.

Facilitate: Collaborations of Institute with R&D Organizations/Industry (Research and Consultancy).

Protection of Intellectual Property / Knowledge generated at VPKBIET (Patents/copyrights…).

Encourage Research Publications / Presentations in Journals/ Int. conferences abroad.

R & D Cell Structure

Research Facilities @ Dept. of Civil Engineering

Research & Development Committee Composition

Dr. R. S. Bichkar		Principal (Head)
Dr. S. M. Bhosle		Dean R & D
Dr. R. K. Shastri		Member (Dean Academics)
Dr. Vipin Gawande		Research Coordinator (Mechanical Engg)
Dr. Samadhan Morkhade		Research Coordinator (Civil Engg)
Dr. Lokesh Brahmane		Research Coordinator (ENTC Engg & Head IPR Cell)
Dr. N.A. Jadhav		Research Coordinator (General Sciences)
Dr. Chaitanya Kulkarni		Research Coordinator (Computer Engg.)
Dr. S. C. Bali		Head - Consultancy
Mr. Avinash Kokare		Research Coordinator (IT)
Ms. Jyoti Rangole		Head – Entrepreneurship Development

Funded Projects and Grants

Grant Received under Sponsored Research Projects: 2019-2020

Research Project Title	Department	Faculty Investigator	Funding Agency	Grant Received
Optimisation of location for the clean air equipment to maximise the benefits	Mechanical Engg.	Mr. Avinash Kolekar	Cummins India Ltd. Pune	Rs. 3,90,000

Grant Received under BCUD Sponsored Research Projects: 2016-2018

Research Project Title	Department	Faculty Investigator	Grant Received
EEG based Emotion Recognition	Electronics and Telecom. Engg.	Mr. P. N. Arotale Mr. Premanand Kadbe (Co-Investigator)	Rs. 1,10,000
A Pipeline VLSI architecture for 2-D DWT	Electronics and Telecom. Engg.	Mr. Balasaheb Patil Mr. Premanand Kadbe (Co-Investigator)	1,70,000
Side Scan SONAR Image Analysis: An Application to	Electronics and Telecom. Engg.	Mrs. Jyoti Rangole	1,40,000
Credit Card Fraud Detection using data mining tech	Information Technology	Mr. Dinesh Zende	63,000

Grant Received under BCUD Sponsored Research Projects: 2014-2016

Research Project Title	Department	Faculty Investigator	Grant Received
Investigation of Nonlinear Effects (Optical Solutions) in Fiber Optic Communication and It's Applications	Electronics and Telecom. Engg.	Mr. Vikas Deshmukh	Rs.1,90,000
A pipelined VLSI Architecture for 2-D DWT	Electronics and Telecom. Engg.	B. H. Patil	Rs.1,70,000
Peak Power to Average Power Reduction of OFDM System Using Modified Selective Mapping Technique	Electronics and Telecom. Engg.	D. T. Kushnure	Rs.1,70,000
Ambient Noise, Characterization in Shallow Depths for Tropical Water of The Indian Ocean Region	Electronics and Telecom. Engg.	S. S. Jagdale	Rs.1,90,000
High speed network intrusion system using stride finite Automata	Computer Engg.	R. H. Ambole	Rs.50,000
Discrimination detection using association rule mining	Computer Engg.	S. S. Nandgaonkar	Rs.70,000
Detection of Adware using Data Mining and Machine Learning Techniques.	Computer Engg.	M. D. Shelar	Rs.50,000
Electricity Transformer Lifetime Estimation using Association Rule Mining	Computer Engg.	P. M. Padulkar	Rs.80,000
Inpainting of Digitized Vintage Films via Maintaining Spatiotemporal Continuity	Computer Engg.	S. A. Shinde	Rs.70,000
Novel Method for movie character identification based on graph matching	Computer Engg.	R. V. Panchal	Rs.70,000
IRIS Recognition system in less constrained Environment	Information Technology	P. M. Patil	Rs.1,20,000
Characterization and comparison of solar selective coatings between Ni-Al and NI-CO on Al substrate	Mechanical Engineering	V. B. Bhagwat	Rs.85,000
Eeg Signal Classification to examine brain activity.	Electronics and Telecom. Engg.	Mr. Shashank Biradar	Rs.1,80,000

Grant Received under BCUD Sponsored Research Projects: 2013-15

Research Project Title	Department	Faculty Investigator	Grant Received
Experimental investigation and analysis recast layer formation in wire electro discharge machining process.	Mech. Engg.	Dr. S. M. Bhosle & S. V. Shelge	2,15,000
Design of C-slot Microstrip Patch Antenna for Wi-Max Application.	Electronics and Telecom. Engg.	Mr. Madan Jadhav	2,00,000
Detection of spyware using data mining and machine learning techniques Duration	IT	Mr. Dinesh Zende	70,000

Grant Received under BCUD Sponsored Research Projects: 2012-14

Research Project Title	Department	Faculty Investigator	Grant Received
Spectroscopic Study of Medicinal and Edible Mushrooms for Development of Optical Sensors for Industrial and Agriculture Applications	General Science	Mr.Anil Disale	90,000
Better Network Security Using Generalized Hill Cipher Algorithm	General Science	Mr.Anil Hiwarekar	1,25,000
Better Network Security Using Generalized Hill Cipher Algorithm	General Science	Mr.Anil Hiwarekar	1,25,000

Grant Received from AICTE for the following MODROB Project: 2012-13

Title of Project	Department	Project Investigator	Grant Received
Modernization of Microwave Laboratory	Electronics and Telecom. Engg.	Dr. S. B. Deosarkar	Rs. 19,71,950
Non-Destructive Testing of existing structure and rehabilitation	Civil Engineering	Prof. G. N. Narule	Rs. 6,00,000

Grant Received for Seminars & Workshops (Year 2019-20)

Title of Seminar/Workshop	Department	Investigator	Funding Agency	Funding Amount
For organization of Symposium/Workshop on "Damage detection and characterization strategy of non-engineering structures using PZT sensor : Theory and Practice" under Assistance to Professional Bodies & Seminar / Symposia Scheme (SERB- DST).	Civil Engineering	Dr. C. B. Nayak	DST-SERB	Rs.75,000/-
National level Seminar / Workshop on Damage detection strategy of structures using smart materials:Theory and Practice.	Civil Engineering	Dr. C. B. Nayak	QIP, SPPU, Pune	Rs.75,500/-
Faculty Development Program on "Deployment of Internet of Things"	Electronics and Telecom. Engg.	Dr. S. B. Lande	Electronics & ICT Academy,PDPM IIITDM, Jabalpur	Rs.1,75,500/-

Grant Received for Seminars & Workshops under BCUD, SPPU,Pune (Year 2017-18)

Title of Seminar/Workshop	Department	Investigator	Funding Amount
National Level Workshop - Steel Design Bridging the Gaps: Theory and Practice.	Civil Engineering	Dr. Sharad Ghodke	Rs. 88,400/-
State Level Workshop - Application of Power Electronics to Power Systems.	Electrical Engineering	Dr. Mohan Thakre	Rs. 44,000/-

Grant Received for Seminars & Workshops under BCUD, SPPU,Pune (Year 2013-16)

Title of Seminar/Workshop	Department	Investigator	Funding Amount
Faculty Development Program	Info. Technology	Mr. D. A. Zende	Rs. 1,50,000/-
State Level Seminar.	Electrical Engineering	Mrs. Sushma Nandgaonkar	Rs. 59,500/-
State Level Workshop on "Critical Issues in Nuclear Technology"	Mechanical Engineering	Mr. Kolekar A. H. Mr. Jadhav K. M.	Rs. 1,00,000/-
Faculty Development Program	Computer Engineering	Mr. D. B. Hanchate	Rs. 25,000/-

QIP Equipments

1. Grant for Photo copier machines from QIP of University of Pune; 4/2012 – 5/2013; Estimated Value Rs.75000/- (Coordinator - Dr. S. M. Bhosle).

2. Grant for Sports equipments (Multi-Gym) from QIP of University of Pune; 4/2013 – 5/2014; Estimated Value Rs.89000/- (Coordinator - Dr. S. M. Bhosle).

3. Grant for LCD Projectors from QIP of University of Pune; 4/2013 – 5/2014; Estimated Value Rs.75000/- (Coordinator - Dr. S. M. Bhosle).

Travel Grant Received

Name of Faculty	Department	Title of Conference	Funding Agency	Funding Amount
2018-19
Mr. U. T.Jagdale	Civil Engineering	9th International Conference on Structural Engineering and Construction Management 2018, Kandy Srilanka	SPPU, Pune	60,000/-
Dr. S. G.Morkhade	Civil Engineering	Structural Engineering Convention (SEC-18), 2018, Jadavpur University Kolkata	SPPU, Pune	15,000/-
2017-18
Dr. C. B. Nayak	Civil Engineering	8th International Conference on Structural Engineering and Construction Management 2017, Kandy Srilanka	SPPU, Pune	25,000/-
2015-16
Dr.Sheetal Takale	Information Technology	16th International Conference on Web Information System En- gineering, WISE-2015, Miami, Florida, USA	SPPU, Pune	1,50,000/-
Dr.Sheetal Takale	Information Technology		Centre for International Co-operation in Science(CICS), jointly sponsored by CSIR	25,000/-
2013-14
Dr. Rajveer Shastri	Electronics & Telecomm. Engg.	OCEANS'13, MTS/IEEE San Diego conference 23-26 Sept. 2013	SPPU, Pune	1,35,000/-

Summary

Recipients of Summer Research Fellowships

Coordinating Institute	Faculty	Department	Year
IIT Guwahati	Miss. Yadav Mona	Mech Engg	2018
IDRBT Hyderabad	Mrs. Kanchan Bhale	IT	2016
IIT Delhi	Mr. Madan Jadhav	E&TC Engg.	2016
IIT Delhi	Mr. D.A. Zende, Mr. Sahil Shah	Comp Engg	2015
IIT Delhi	Mr. Keshav Jadhav	Mech. Engg.	2015
IIT Delhi	Mr. Mahesh G. B.	Civil Engg.	2014
IIT Delhi	Mr. Vikas Deshmukh, Mr. S.S. Jagdale	E & TC Engg.	2014
IIT Delhi	Dr. Rajveer Shastri	E & TC Engg.	2013
IIT Guwahati	Dr. Sachin Bhosle	Mech. Engg.	2013
IIT Delhi	Dr. Sachin Bhosle	Mech. Engg.	2012
IIT Delhi	Mrs. Jyoti Rangole	E & TC Engg.	2012
IISc Banglore	Mr. Manik Chavan	Information Technology	2012

Profile- Dean R & D

Dr. Sachin Bhosle

Name:

Designation:

Qualification:

Research Interests:

Email Id:

Dr. Sachin Bhosle

Associate Professor & Dean R&D.

Ph.D.(Michigan Technological University, USA.) M. E.(Manufacturing Processes Engg)

Bio-Materials

[email protected]

Brief Profile :

Mr. Sachin Bhosle is an Associate Professor of Mechanical Engineering and recipient of faculty development program at VPKBIET. He has been deputed to Michigan Technological University, USA. This program offers three years full time deputation for earning Ph.D. degree to teacher-scholars who exemplify the outstanding integration of teaching, research and administration.

Sachin's research focuses on synthesis, biochemical analysis and electron microscopy of bio-nanomaterials for orthopedic applications. He is particularly interested in synthesis of nanostructured bone/dental implant surfaces with enhanced biocompatibility, antimicrobial benefits, and drug delivery. He also investigates bio/nano interface interactions for enhanced osseointegration and cell proliferation using smart bio-nanomaterials with widespread applications in orthopaedics and dental research at the Multi Scale Technologies Institute at Michigan Technological University, Hough, USA.

Research Areas and Skills :

Nanotechnology - Fabrication, characterization and applications of bioinspired nanostructured materials.

Surface modifications - Electrochemical anodization, micro-nano fabrication, micro-machining.

Electrochemistry and materials science at the nanoscale, with a focus on control of self-assembly processes.

Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), ICP-OES, XRD, FTIR, TEM.

Surface heat-treatments, ferrous metallurgy, foundry practices, engineering nanotextured titanium surfaces for implants.

Awards and Recognitions :

Elite Certification by NPTEL for certification exam on Educational Leadership Course.

Educational Leadership Award by 26th Business School Affaire & Dewang Mehta National Education Awards, 8th Oct-2018, Pune.

Dean's Award for Outstanding Scholarship - Spring 2017 by Michigan Technological University, USA.

Graduate faculty (PG Teacher) recognition from University of Pune, India 2012.

Awarded Summer Faculty Research Fellowship at Indian Institute of Technology Delhi, India 2012.

Selected as Asst. Prof. of Mechanical Engg at Dr. A.S. College of Agricultural Engg, MPKV (Govt. of MH), Rahuri (2009).

Grant/Funding Received :

The work performed in PhD was supported by the 21st Century Jobs Trust Fund received through the M-TRAC program funded by Michigan Strategic Fund oversight by the MEDC from the State of Michigan, USA (2014-17) Grant Case-48161. The technology developed is under process for a legal agreement between Nanovation Partners LLC and MichiganTech.

Grant for Research Project - 'Experimental Investigations & Analysis of recast layer formation in WEDM', from University of Pune; 5/2012- 5/2014; Role: Principal Investigator; Estimated Value of funding received Rs.215000/--. This grant added micro-hardness testing setup to metallurgy lab.

Grant for seminar/ workshops from University of Pune; 4/2012 - 5/2013; Role: Coordinator; Estimated Value Rs.1,00,000/-.

Grant for Photo copier machines from QIP of University of Pune; 4/2012 - 5/2013; Estimated Value Rs.75000/-.

Grant for Sports Material (Multi-Gym) from QIP of University of Pune; 4/2013 - 5/2014; Estimated Value Rs.89000/-.

Grant for LCD Projectors from QIP of University of Pune; 4/2013 - 5/2014; Estimated Value Rs.75000/-.

Peer-Reviewed Journal Publication :

Bhosle S.M., Friedrich C.R., 'Wetting behavior and chemistry of titanium nanotubular orthopedic surfaces: Effects of aging and thermal annealing', Springer Journal of Bio-Tribo Corrosion (2017) 3:26. DOI: 10.1007/s40735-017-0085-0.

Bhosle S.M., R. Tewari, C.R. Friedrich, 'Dependence of nanotextured titanium orthopedic surfaces on electrolyte condition', Journal of Surface Engineered Materials and Advanced Technology, 2016, 6, 164-175. DOI: 10.4236/jsemat.2016.64015.

A Vara, Erin Baker, Sachin Bhosle, Craig Friedrich, "Enhancing Osseointegration of Orthopaedic Implants with Titania Nanotube Surfaces" SAGE journal of Foot and Ankle Orthopedics I, (I) 2016. DOI: 10.1177/2473011416S00177.

Bhosle S.M., Friedrich C.R., "Facile synthesis of nanosilver-incorporated antibacterial titanium nanotube surfaces', manuscript accepted to SpringerJournal of Bio-Tribo Corrosion 3:35 (2017).DOI: 10.1007/s40735-017-0095-y

Bhosle S.M., Friedrich C.R., "Rapid Heat Treatment for Anatase Conversion of Titania Nanotube Orthopedic Surfaces", manuscript accepted for publication in IOP Journal of Nanotechnology https://doi.org/10.1088/1361-6528/aa8399

Preceedings, Oral & Poster Presentations at International Conferences :

Bhosle S.M., Friedrich C.R., 'Rapid Heat Treatment for Anatase Conversion of Titania Nanotube Orthopedic Surfaces', at Orthopedic Research Society's ORS Annual Meeting, March 20-22, 2017 at San Diego, California, USA.

Bhosle S.M., Friedrich C.R., 'Effects of Aging and Thermal Treatment on Nanotextured Titanium Orthopaedic Surfaces' Presented at Orthopedic Research Society's ORS Annual Meeting, March 5-8, 2016 at Orlando, Florida, USA.

C.R. Friedrich, E. Baker, S.M. Bhosle, 'In-Vivo Performance and Characterization of Nanostructured Orthopedic Surfaces',The Minerals, Metals and Materials Society, TMS 2016, Feb 14-18, Nashville, Tennessee, USA.

V. Bhardwa, N. Dilip, S.M. Bhosle, R.K. Pandey, 'Studies for Circumferential Temperature Distributions in Bronze and Cast-Iron Journal Bearings with MRF as Lubricant: Temperature rise with MRF vs. Base Oil of MRF with Surfactant', 13th International Conference on Magnetic Fluids 7-11 January 2013, New Delhi-110016, India.

Erin Baker, S.M. Bhosle, Craig Friedrich, 'In Vivo Biocompatibility of Titania Nanotube Surfaces Developed for Enhancing Osseointegration' Orthopedic Research Society's ORS Annual Meeting, March 5-8, 2016 at Orlando, Florida, USA.

R. Tewari, S.M. Bhosle, C.R. Friedrich, 'Dependence of Nanotextured Titanium Orthopedic surfaces on Electrolyte Fluoride concentration' Presented at Biomedical Engineering Society's Annual Meeting, October 5-8, 2016 at Minneapolis, MN, USA.

Erin Baker, Sachin Bhosle, Craig Friedrich, 'Enhancing Osseointegration of Orthopedic Implants with Titania Nanotube Surfaces', American Orthopedic Foot and Ankle Society's AOFAS annual meeting, July 20-23, 2016 at Toronto, Ontario.

Bhosle S.M., Friedrich C.R., 'Engineering nanotextured titanium surfaces for implants', Abstract submitted to 2017 International Conference on Advances in Biomaterials and Biomechanics in Bioengineering (ANBRE17-ICBME17) to be held on August 28 - September 1, 2017 Ilsan (Seoul), Korea.

Course Certifications & Trainings :

Mathworks MATLAB ONRAMP Certification – Mathworks Training Services – 3rd Oct 2018.
Mathworks MATLAB Fundamentals Certification – Mathworks Training Services – 29th Nov 2018.
Two week FDP on “Entrepreneurship” sponsored by NSTEDB, DST, GoI between 03rd to 13th December 2018.
NPTEL Elite Certification – for Educational Leadership Course – 07th Oct 2018.
NPTEL Elite Certification – for Fundamentals of Manufacturing Course – 28th Oct 2018.
NPTEL Elite with Gold Certification – for Soft Skills & Business Negotiation Skills Course – 27th April 2019.
NPTEL Elite Certification – for Manufacturing Process Technology Course – 28th April 2019.
Udemy Certification – Manufacturing Guide for Mechanical Product Development. – 22nd Oct 2018.
Udemy Certification – Follow-up Order from Design to Production – 23rd Oct 2018.
Udemy Certification – Basic to Advanced Level CATIA V5 HD Video Training (35+ hrs) – 02nd Oct 2018.
Udemy Certification – IoT and Industry 4.0. (2.5 hrs) – 16th Nov 2018.
Udemy Certification – Modeling and Prototyping for Mechanical Engineers (1.5 hrs) – 17th Nov 2018.
Udemy Certification – Arduino Workshop 2018 (4 hrs) – 22nd Nov 2018.
Udemy Certification – Solidworks-2015 Training (19.5 hr) – 29th Nov 2018.
One week online FDP on ‘Assessment and Evaluation under Outcome Based Education (ICT04)’ during 10/06/2019 to 14/06/2019 organized by NITTTR Kolkata.
One week ICT mode workshop on ‘NBA Accreditation’ during 17/06/2019 to 21/06/2019, organized by NITTTR Kolkata.
One week online FDP on ‘Rural Development through Technical Institution (ICT08)’ during 29/07/2019 to 02/08/2019, organized by NITTTR, Kolkata.
Mathworks MATLAB ONRAMP Certification – Mathworks Training Services – 12 November 2019 (Second time).
Mathworks’ TEACHING WITH MATLAB Certification – Mathworks Training Services – 14 November 2019.
NPTEL Elite Certification – for Toyota Production System Course – 16th November 2019.

Publications Summary

Civil Engineering

C. B. Nayak , Experimental and Numerical Investigation on Compressive and Flexural BehaviourStructural Tubular Beams Strenghening with AFRP Composites., Journal of King Saud University - Engineering Sciences, In Press, 2020

Morkhade S. G., Gupta L. M., Behaviour of Castellated Steel Beam: State of the Art Review, Electronic Journal of Structural Engg, Article in Press, 2020

Umesh T. Jagadale, Chittaranjan B. Nayak, Asmita Mankar, Sunil B. Thakare, Wasudeo N. Deulkar, An experimental based python programming for structural health monitoring of non engineered RC frame, Innovative Infrastructure Solutions-Springer, 5, 1-10, 2020

Electronics & Telecommunication Engineering

Sudhir B. Lande, Shashank Biradar, Sudhir M. Kharad, C.K. Thadani and Pallavi B. Pawar "Review On UWB Antenna Design With Band Stop Function By Implementing Parasitic Patch Method" ISSN: 2395-1680 ISSN: 2395-1680 (online) ICTACT Journal on Microelectronics, January 2020, volume: 05, ISSUE: 04

Lokesh Kumar Bramhane, Santosh D. Chede, Premanand K. Kadbe, Balasaheb Patil, Sudhir B. Lande, Next Generation Logic Gate Designs using Improved Polarity Control Bipolar Junction Transistor, International Journal of Recent Technology and Engineering (IJRTE), Vol.8 & pp.-2015- (2019) (Scopus Indexed).

L.K. Bramhane, P.K. Kadbe, B.H. Patil, S.D. Chede and S.B. Lande, Dual Dielectrically Modulated Electrostatically Doped Tunnel-FET for Biosensing Applications, International Journal on Emerging Technologies, vol.-10 & pp.-153-159 (2019) (Scopus Indexed)

Sudhir B. Lande, Chaitrali M. Sargar, C. K. Thadhani "Blockchain technology in agriculture & food supply chain", published in Internation journal of Research and analytical review (IJRAR) June 2019, Volume 6, Issue 2.

Jyoti Rangole, Pritam Parish Kadam, Energy Efficient LED Driver , International journal of modern electronics and communications engineering , vol 7 (2019) (UGC Care Indexed)

B.H.PATIL, Energy Harvesting Bicycle, International Journal of Research and Analytical Reviews (IJRAR), Volume 6, Issue 2 (2019) (UGC Care Indexed)

Civil Engineering

C. B. Nayak, S.B.Thakare, Seismic performance of existing water tank after condition ranking using non destructive testing, International J.of Advanced Structural Engg, 11, 395-410, 2019

Morkhade S. G., Swami M. Baswaraj, Chittranjan B. Nayak, Comparative study of effect of web openings on the strength capacities of steel beam with trapezoidally corrugated web, Asian Journal of Civil Engg, 20 (8), 1089-1099, 2019

Morkhade S. G., Gupta L. M., Ultimate load behaviour of steel beams with web openings, Australian Journal of Structural Engg, 20 (2), 124-133, 2019

Narule, G. N. and Surwase H., Behavior of RC T-Beam strengthen using basalt fiber reinforced polymer (FRP) sheet, International Research Journal of Engineering and Technology,. 6, 6,2019

Morkhade S.G., Kshirsagar M., Dange R., Patil A., Analytical study of effect of web opening on flexural behaviour of hybrid beams, Asian Journal of Civil Engg, 20 (4), 537-547, 2019

Electrical Engineering

Mr. Nikhil Vaidya, “Design of MCC control panel using Electrical AutoCAD”, The International journal of analytical and experimental model, Volume XI, IssueVII, July /2019, Page No:874. (2019) (UGC Care Indexed)

Mr. Rohit S. Tarade Mr. Dipak S. Yeole Mr. Pavan D. Upadhye, Energy Audit: A Case of an Industrial Area, Journal of Applied Science and Computations, Volume VI, Issue II (2019) (UGC Care Indexed)

Mechanical Engineering

CR Friedrich, E Baker, S. M. Bhosle, D Justin, IN VIVO ANTI-BACTERIAL EFFECTIVENESS OF NANOTEXTURED TITANIUM IMPLANT SURFACES, Orthopaedic Proceedings, 101, 43-43, 2019

M. S. Lande, N. K. Mandavgade, Value Stream mapping in Press Shop, International Journal of Innovations in Engineering & Science, 4, 24-27, 2019

C. K. Mangrulkar, A. S. Dhoble, S. Chamoli, A. Gupta, V. B. Gawande, Recent advancement in heat transfer and fluid flow characteristics in cross flow heat exchangers, Renewable and Sustainable Energy Reviews, 113, 109220, 2019

First Year Engineering

Vijay Singh, N. Singh, M.S. Pathak, V. Natarajan, and Nitin A. Jadhav, Luminescence and ESR study of Gd⁠3+ doped Ca⁠3Al⁠2O⁠6 phosphor, Optik - International Journal for Light and Electron Optics, (176) 650-654, 2019

Vijay Singh, N. Singh, M.S. Pathak S. Watanabe, T.K. Gundu Rao Nitin A. Jadhav, and Young-Wan Kwon, Photoluminescence and electron paramagnetic resonance properties of UV-B light emitting Gd3+ activated Y2O3 phosphor prepared by sol-gel method, Optik - International Journal for Light and Electron Optics, (176) 694-698, 2019

M.K. Kokare, Nitin A. Jadhav, Vijay Singh and S.M. Rathod, Effect of Sm⁠3+ substitution on the structural and magnetic properties of Ni-Co nanoferrites, Optics and Laser Technology, (112) 107-116, 2019

Nitin T Shelke, S. C. Karle, B R Karche, Hydrothermal Growth and Humidity-Dependent ElectricalProperties of Molybdenum Disulphide Nanosheets, Journal of Nanoscience and Nanotechnology, 19, (8), 5158-66, 2019

Nitin T Shelke, Dattatray J Late, Hydrothermal growth of MoSe2nanoflowers for photo- and humiditysensor applications Sensors and Actuators A: Physical, 295, 160-168, 2019

A. S. Disale, P. B. Undre, S. A. Yaseen, F. A. Saif, A. S. Alameen, S. S. Patil & P. W. Khirade Dielectric Relaxation and FTIR Studies on Molecular Interaction between Ethylene Glycol Monobutyl Ether with Bromobenzene and Chlorobenzene Integrated Ferroelectrics: An International Journal (Tailor and Francis) 202, 67–78 2019

A. B. Patil, Innovative Ways of Teaching English to Students of RuralIndia: Challenges and Corrective Measures Empowering Students of Bharat withEnglish for Career Development, 182-188, 2019

Mechanical Engineering

D. Justin, CR. Friedrich, S. M. Bhosle, E. Baker, SH. Jin, C. Pratt, Enhanced Bone Fixation by Nano-Texturing via Titanium Oxide nanotube anodization, Orthopaedic Proceedings, 100B, 5-5, 2018

A. Wadhawan, A. S. Dhoble, V. B. Gawande Analysis of the effects of use of thermal energy storage device (TESD) in solar air heater, Alexandria Engineering Journal, 57, 1173–1183, 2018

V.B. Gawande, A. S. Dhoble, D. B. Zodpe, S.G. Fale, Thermal performance evaluation of solar air heater using combined square and equilateral triangular rib roughness, Australian Journal of Mechanical Engineering, 01, 1448-4846, 2018

V.B. Gawande, A. S. Dhoble, D. B. Zodpe, C Mangrulkar, A comparative analysis of thermo-hydraulic performance of a roughened solar air heater using various rib shapes, Australian Journal of Mechanical Engineering, 01, 1448-4847, 2018

K. V. Shivaprasad, P. R. Chitragar, G. N. Kumar, Effect of hydrogen addition on combustion and emissions performance of a high speed spark ignited engine at idle condition., Thermal Science, 22 (3), 1405-1413, 2018,

M. S. Gaikwad, K. M. Jadhav, A. H. Kolekar, P. R. Chitragar, Combustion characteristics of biomethane–dieseldual-fueled CI engine with exhaust gasrecirculation, Biofuels, 44136, 2018

Electronics & Telecommunication Engineering

Dr. Sudhir B. Lande, Suresh S. Balpande, “FPAA Based Design of Assistive Listening Device for Hearing Disorders People, Helix Vol. 8(6): 4446 -4452, DOI 10.29042/2018-4446-4452, Helix E-ISSN: 2319-5592; P-ISSN: 2277-3495 (WOS indexed) " (2018)

Information Technology

Mr Santosh A. Shinde, Dr P. Raja Rajeswari, Intelligent health risk prediction systems using machine learning a review, International Journal of Engineering & Technology, Vol 7, No 3 (2018).

Civil Engineering

Narule, G. N. and Bambole, A. N., Axial behavior of CFRP wrapped RC columns of different shapes with constant lenderness ratio, Structural Engineering and Mechanics,. 65, 6, 679-687, 2018

Samadhan G. Morkhade, Subhan Shaikh, Ajay Kumbhar, Abdulaziz Shaikh, Rushikesh Tiwari, 'Comparative study of ultimate load for castellated and plain-webbed beams' International Journal of Civil Engineering and Technology(IJCIET), 9(8), 2018, pp. 1466-1476.

First Year Engineering

Karan Surana Nitin A. Jadhav Pramod K. Singh B. Bhattacharya, Studies on polarization effect of polyethylene-based polymer electrolyte in dye and quantum dot sensitized solar cells, Applied Nanoscience, 82065-2069, 2018

Vijay Singh, N. Singh, M.S. Pathak, V. Natarajan, and Nitin A. Jadhav, PL and ESR Study on UVB-Emitting Gadolinium-Doped BaMgAl10O17 Hexagonal Phase Obtained by Combustion Synthesis, Journal of ELECTRONIC MATERIALS, 47 (12) 7365-7371, 2018

M.K. Kokare, Nitin A. Jadhav, Yogesh Kumar, K.M. Jadhav, S.M. Rathod Effect of Nd3+ Doping on Structural and Magnetic Properties of Ni0.5Co0.5Fe2O4 Nanocrystalline Ferrites Synthesized by Sol-gel Auto Combustion Route, Journal of alloys and compounds, (748) 1053-1061, 2018

Nitin T Shelke , S. C. Karle, B R Karche, Photosensor properties of spray deposited CdS thin films, International Journal of Multifaceted and Mutilingual Studies, 5, (2,) 112-116, 2018

Y.M.Chitare, H.R.Kulkarni, A.S.Disale Synthesis, Characterization and Optical Properties of AgIn2Se4 Thin Films by Electrodeposition technique International Journal of Multifaceted and Multilingual Studies 5,135-138, 2018

A. B. Patil, Interpreting Salman Rushdie as a Postmodern Writer, Asian Quarterly: An International Journal of Contemporary Issues, 15, 4 85-99, 2018

Mechanical Engineering

M. S. Lande , P. M. Sirsat, R. S. Tupkar, “A case study on predictive maintenance of OJ/5522DT-40 CNC milling machine, International journal of advanced research and publication (IJARP) , 1, 27-30, 2017

S. M. Bhosle, CR. Friedrich, Wetting behavior and chemistry of titanium nanotubular orthopedic surfaces: Effects of aging and thermal annealing, Springer Journal of Bio-Tribo Corrosion, 3, 26, 2017

S. M. Bhosle, CR. Friedrich, Facile Synthesis of Nanosilver-Incorporated Titanium Nanotube for Antibacterial Surfaces, Springer Journal of Bio-Tribo Corrosion, 3, 35, 2017

S. M. Bhosle , CR. Friedrich, Rapid Heat Treatment for Anatase Conversion of Titania Nanotube Orthopedic Surfaces, IOP Journal of Nanotechnology, 28, 405603, 2017

X. Zhong, S.C. Bali, T. Shoji, Accelerated test for evaluation of intergranular stress corrosion cracking initiation characteristics of non-sensitized 316 austenitic stainless steel in simulated pressure water reactor environment, Corrosion Science, 115, 106-117, 2017

X. Zhong, S.C. Bali, T. Shoji, Effects of dissolved hydrogen and surface condition on the intergranular stress corrosion cracking behavior of non-sensitized 316 stainless steel in simulated PWR primary water, Corrosion Science, 117, 143-157, 2017

M. S. Yadav, S. A. Giri, V. C. Momale, Sizing analysis of louvered fin flat tube compact heat exchanger by genetic algorithm, Applied Thermal Engineering, 125, 1426-1436, 2017

K. V. Shivaprasad, P. R. Chitragar, V. Nayak, G. N. Kumar, Influence of spark timing on the performance and emission characteristics of gasoline– hydrogen-blended high-speed spark-ignition engine, International Journal of Ambient Energy, 38 (6), 605-612, 2017

Information Technology

S. A. Takale, P. J. Kulkari, How Flickr Helps to Know the Place: Visual and Textual Summarization of Geo-location, ICSE-International Journal of Computer Science and Engineering, 5,9, 102-107, 2017

Civil Engineering

C. B. Nayak and S. B. Thakare, Analysis and retrofitting of elevated water tank in Pune district: by Uttarkashi Earthquake”, Journal of Engineering Technology, 6, 201-211, 2017

Morkhade S. G., Gupta L. M. Experimental investigation for failure analysis of steel beams with web openings, Steel and Composite Structures, Vol. l. 23, No. 6647-656, 2017

First Year Engineering

Nitin T Shelke, B R Karche, Ultraviolet photosensor based on few layered reduced graphene oxide nanosheets, Applied Surface Science, 418, 374-379, 2017.

Mechanical Engineering

M. S. Lande, R. L. Shrivastava, Quality Practice Model for Micro Small Medium Enterprises (MSMEs), Industrial Engineering Journal, 9, 43-46, 2016

M. S. Lande, R. L. Shrivastava, D. Seth, Critical Success factors for Lean six sigma in SMEs (Small & Medium enterprises), The TQM Journal, 28, 613-635, 2016

A. R. Duragkar, S. N. Sakhale, M. S. Lande, Floor cranes for industrial use, IJRET: International Journal of research engineering and technology, 5, 508, 2016

S. M. Bhosle, R Tewari, CR Friedrich, Dependence of nanotextured titanium orthopedic surfaces on electrolyte condition, Journal of Surface Engineered Materials and Advanced Technology, 6, 164-175, 2016

A. Vara, E. Baker, M. Salisbury, M. Fleischer, S. M. Bhosle, C. Friedrich, Enhancing Osseointegration of Orthopaedic Implants with Titania Nanotube Surfaces, SAGE journal of Foot and Ankle Orthopedics I, 1, 1, 2016

V.B. Gawande, A. S. Dhoble, D. B. Zodpe, S Chamoli, Experimental and CFD-based thermal performance prediction of solar air heater provided with right-angle triangular rib as artificial roughness, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38, 551–579, 2016

V.B. Gawande, A. S. Dhoble, D. B. Zodpe, S Chamoli, Experimental and CFD based thermal performance prediction of solar air heater provided with chamfered square rib as artificial roughness, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38, 643–663, 2016

V.B. Gawande, A. S. Dhoble, D. B. Zodpe, S Chamoli, A review of CFD methodology used in literature for predicting thermo-hydraulic performance of a roughened solar air heater, Renewable and Sustainable Energy Reviews, 54, 550–605, 2016

V.B. Gawande, A. S. Dhoble, D. B. Zodpe, S Chamoli, Experimental and CFD investigation of convection heat transfer in solar air heater with reverse L-shaped ribs, Solar Energy, 5, 275–295, 2016

V.B. Gawande, A. S. Dhoble, D. B. Zodpe, S Chamoli, Analytical approach for evaluation of thermo hydraulic performance of roughened solar air heater, Case Studies in Thermal Engineering, 8, 19–31, 2016

M. S. Gaikwad, K. M. Jadhav, A. H. Kolekar , Experimental Analysis of Dual Fuel Compression Ignition Engine with Exhaust Gas Recirculation, International Journal of Current Engineering and Technology, 5, 480-486, 2016

V. C. Momale, S. A. Giri, M. S. Yadav, Compression Ignition Engine simulation Using Computational Fluid Dynamics, International Advanced Research Journal in Science, Engineering and Technology, 3, 183, 2016

M. S. Yadav, S. A. Giri, V. C. Momale, Tube Side Optimization of a Compact Heat Exchanger by Genetic Algorithms, International Advanced Research Journal in Science, Engineering and Technology, 3, 201, 2016

M. S. Yadav, S. A. Giri, Genetic Algorithms Based Optimization of Compact heat Exchangers : A review, International Advanced Research Journal in Science, Engineering and Technology, 3, 202, 2016

P. R. Chitragar, K. V. Shivaprasad, V. Nayak, P. Bedar, G. N. Kumar, An experimental study on combustion and emission analysis of four cylinder 4-stroke gasoline engine using pure hydrogen and LPG at idle condition, Energy Procedia, 90, 525-534, 2016

V. Nayak, G. S. Rashmi, P. R. Chitragar, P. Mohanan, Combustion characteristics and cyclic variation of a LPG fuelled MPFI four cylinder gasoline engine, Energy Procedia, 90, 470-480, 2016

P. R. Chitragar, K. V. Shivaprasad, G. N. Kumar, Use of hydrogen in internal combustion engines: A comprehensive study, Journal of Mechanical, 1 (3), 84-96, 2016

K. V. Shivaprasad, P. R. Chitragar, G. N. Kumar, Hydrogen addition on combustion and emission characteristics of high speed spark ignition engine-an experimental study, Journal of Engineering, 11 (11), 1554-1564, 2016

R. N. Khalate, P. D. Kale, Fabrication and static analysis of Mono composite leaf spring, International journal of Recent Scientific Research, 7, 8198-8201, 2016

P. V. Dhandore, P. M. Pawar, Experimental Analysis of MRE Isolator for With and Without Magnetic Field Condition, International Journal of General Science and Engineering Research, 2(2), 63-68, 2016

A. B. Khalate, V. B. Bhagwat , Detection of Cracks Present in Composite Cantilever Beam by Vibration Analysis Technique, International Journal of Innovative Science, Engineering & Technology, 3 (1), 400, 2016

Electronics and Telecommunication Engineering

Jadhav Madan Mohan, 'Review on Fractal Antennas for Wireless Communication', International journal of Latest trends in Engineering and Technology,Volume & Pages 06 & 4, 2016, ISBN/ISSN No. NA / 2278-621X

Jadhav Madan Mohan, 'Review on Types of Reconfigurable Antennas', International Journal of Advance Engineering and Research Development, Volume & Pages 03 & 3, 2016, ISBN/ISSN No. NA / 2348-4470(E)

Jadhav Madan Mohan, 'Review paper on techniques and design of Compact Slot Antenna for Multiband Applications', International journal of Advance Engineering and Research Development,Volume & Pages 03 & 5, 2016,ISBN/ISSN No. NA / 2348-4470

Kolhar Shrikrishna Ulhas, 'Study of Statistical Tests for Underwater Ambient Noise' International Journal of Science technology and Engineering, Volume & Pages 2 & 6 2016, ISBN/ISSN No. 2349-784X / 2349-784X

Jagdale Shantanu Shirish, 'Analysis of SPM, XPM, and FWM in Fiber Optic Communication using OptiSystem',International Journal of Science Technology & Engineering, Volume & Pages 2 & 7 , 2016, ISBN/ISSN No. 2349-784X / 2349-784X

Shastri Aparna R, "Design of Semen Straw Counting System Using LabVIEW," International Journal of Science Technology and Engineering, Vol. 7, pp-161-164, January 2016, ISSN (online): 2349-784X

Civil Engineering

Khartode R. R., Kulkarni D. B., Mix Proportioning of HSC Using Manufactured Sand, International Journal of Science and Research (IJSR), 5,7, 2016

Information Technology

Sheetal A. Takale, Prakash J. Kulkarni, Sahil K. Shah, "An Intelligent Web Search Using Multi Document Summarization," International Journal of Information Retrieval Research (IJIRR), Vol. 6 ,No. 2, February 2016, ISSN: 2155-6377.

D. A. Zende, Priyanka Lokhande, Enhancing Student Learning through Social Network Experiences International Journal of Engineering Development and Research, 4,5, 108-112 2016

D. A. Zende, G.B. Chavan, Effective Semantic Search over Huge RDF Data International Journal of Engineering Development and Research, 4,3, 113- 119 2016

First Year Engineering

A. P. Hiwrekar, Encryption-Decryption Using Laplace Transforms, Asian Journal of Mathematics and Computer Research, International Knowledge Press, 12, (3), 201-209, 2016

A. B. Patil, Learning Reading Skills: Problems and Solutions, Contemporary Issues in Languages and Humanities 0-65, 2016

A. B. Patil, Studying Salman Rushdie’s Shame as a Postmodern Novel, Sahitya Anand, 3,12, 94-103, 2016

A. B. Patil, Interpreting Salman Rushdie as a Postmodern Writer, Bulletin of Indian Society and Culture, 132-141, 2016

Mechanical Engineering

A. A. Dhavale, A. H. Kolekar, K. M. Jadhav, An Experimental Investigation and Analysis for Engine Performance, Combustion and Emissions of Dual Fuel CI Engine, International Engineering Research Journal (IERJ), 2, 1215-1224, 2015

S. Choudhar, D. D. Rupnawar, A. Kalgunde, Cost – Effective Solution for Twist Free Chassis Design of Three Wheeler Vehicles, International Journal of Innovation in Engineering and Technology, 5, 264-275, 2015

S. Kumbhar, D. D. Rupnawar, Design and analysis of composite coil spring to optimize strain energy by using FEA, VSRD International Journal of Mechanical, Civil, Automobile and Production Engineering, 5, 1, 2015

S. M. Bhosle, S. Shelge, V. Bhagwat, Study and Analysis of Recast layer formation during wire electrodischarge machining process, International Journal of Innovative Research in Science, Engineering and Technology, 4, 8032, 2015

A. G. Dange, D. S. Gaikwad, S. N. Tupe, K. M. Jadhav, Performance Test Analysis of VCR CI Engine using Blends of Karanja Biodiesel-Diesel as a Fuel, International Journal of Current Engineering and Technology, 5 (4), 2300-2303, 2015

K. V. Shivaprasad, P. R. Chitragar, G. N. Kumar, Experimental Investigation of Variations in Spark Timing using a Spark‐Ignition Engine with Hydrogen‐Blended Gasoline, Energy Technology, 3 (12), 1174-1182, 2015

G. V. Thombare, S. V. Shelge, H. P. Borate, Experimental and FEA Analysis of Goat Femur Bone With Different Age Group, International Engineering Research Journal, 2, 2108-2115, 2015

Electronics and Telecommunication Engineering

Shantanu Jagdale, A. Das, "Analysis of Underwater Radiated Noise in Shallow Water," Discovery, 47(219), pp.152-156, 2015.

B. H. Patil,"Image Mapping and Object Removal Using Haar Wavelet Transform in Image Inpainting", International Journal of Science and Research (IJSR) ISSN (Online): 2319-7064 Index Copernicus Value (2013): 6.14 | Impact Factor (2013): 4.43,Volume 4 Issue 4, April 2015.

B. H. Patil,"Alternating Direction Method -Analysis Based Approach for Image Inpainting", GE - International Journal of Engineering Research (GE-IJER) Vol. 3, Issue. 3, March-2015.

B. H. Patil,"Image Mapping and Object Removal Using ADM in Image Inpainting: Review", International Journal on Recent and Innovation Trends in Computing and CommunicationVolume: 3 Issue: 3, ISSN: 2321-8169, page no. 931 - 933, March 2015.

B. H. Patil,"Image mapping and object removal using Daubechies wavelet transform in image inpainting", International Journal of Advance Engineering and Research Development Volume 2,Issue 3, March -2015 Scientific Journal of Impact Factor(SJIF): 3.134 e-ISSN(O): 2348-4470 p-ISSN(P): 2348-6406.

Civil Engineering

Giridhar Narule, "Experimental Investigation on Steel Fiber Reinforced Concrete using Metakaolin," International Journal of Emerging Technology and Advanced Engineering, Vol. 5, No. 4, ISSN 2250-2459, April 2015.

Morkhade S. G., Gupta L. M., Analysis of steel beams with rectangular web openings-Experimental and finite element investigation, Engineering Structures and Technologies, 7:1, 13-23, 2015

Morkhade S. G., Gupta L. M., An experimental and parametric study of steel beams with web openings, International J.of Advanced Structural Engg, 7, 249-260, 2015

First Year Engineering

Nitin A. Jadhav , S K Tomar, Pramod K Singh, and B. Bhattacharya, Nanoporous TiO2 and ZnO Photoelectrodes: A Comparative Photovoltaic Performance Study” Int. J. Electroactive Materials, (3) 1-5., 2015

Nitin T Shelke, B R Karche, Hydrothermal synthesis of WS2/RGO sheet and their application in UV photodetector Journal of Alloys and Compounds, 653, 298-303, 2015

A. P. Hiwrekar, Applications of Laplace Transform for Cryptography, International Journal of Engineering & Science Research 5, 4, 129-13, 2015

A. P. Hiwrekar, Cryptography Using Laplace Transform, International Journal of Engineering Research and Applications.5, 4 102-106, 2015

Mechanical Engineering

R. S. Tupkar, M.S. Lande , P. S. Borkar, S. V. Shende, Experimental Investigation of four stroke spark ignition engine using alcohol petrol blends, IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE), 1, 33-37, 2014

V.B. Gawande, A. S. Dhoble, D. B. Zodpe, Effect of roughness geometries on heat transfer enhancement in solar thermal systems–a review, Renewable and Sustainable Energy Reviews, 32, 347–378., 2014

V.B. Gawande, A. S. Dhoble, D. B. Zodpe, CFD Analysis to Study Effect of Circular Vortex Generator Placed in Inlet Section to Investigate Heat Transfer Aspects of Solar Air Heater, The Scientific World Journal, 01-Nov 1537-744X, 2014

K. V. Shivaprasad, S. Raviteja, P. R. Chitragar, G. N. Kumar, Experimental investigation of the effect of hydrogen addition on combustion performance and emissions characteristics of a spark ignition high speed gasoline engine, Procedia Technology, 14, 141 - 148, 2014

E. Manjrekar, S. H. Kumbhar, U. D. Gulhane, Study and Vibration Response Analysis of MR Cantilever Beam, International Journal of Engineering Development and Research, 3 (1), 288-293, 2014

S. Surve, S. H. Kumbhar, S. S. Goilkar, Acoustics and Flow Field Analysis of Perforated Muffler Design, International Journal of Engineering Development and Research, 2 (4), 565-3570, 2014

A. B. Khalate, V. B. Bhagwat, Review on Detection of Cracks Present in Composite Cantilever Beam by Vibration Analysis Techniques, International Journal Of Engineering, Education and Technology, 03 I, 1, 2014

Computer Engineering

D. M. Padulkar, "Privacy Preservation of Sensitive Information using Slicing, " International Journal of Engineering Research & Technology (IJERT), Vol. 3 Issue 6, June - 2014

D. B. Hanchate, "Software Project Contacts by GRGA Scheduling and EVM," International Journal of Computer Applications 97(13):1-26, July 2014

Rajkumar V. Panchal, Gyankamal J. Chhajed "Prioritization of Implementation Based Testing Technique For Class Under Test," International Journal on Recent and Innovation Trends in Computing and Communication (IJRITCC), vol. 2, No. 9, 2690 - 2694, September 2014, ISSN: 2321-8169.

Prashant T. Raut, Sushma S. Nandgaonkar, "A Development Approach towards Self Learning Schedulers in Linux," International Journal on Recent and Innovation Trends in Computing and Communication ISSN: 2321-8169 Vol. 2 No. 4, pp. 880 - 884, April 2014.

Vyankatesh V. Rampurkar , Gyankamal J. Chhajed, "Combination of Morphological Operations with Structure based Partitioning and grouping for Text String detection from Natural Scenes," International Journal of Advanced Computer Research, Vol.-4 Number-2 No.-15, June-2014, ISSN: 2277-7970.

Information Technology

A. Burungale, D. A. Zende , Survey of Large-scale Hierarchical Classification International Journal of Engineering Research and General Science, 2,6, 917-921 2014

S. A. Swami , P. S. Vidap, Towards Automatic Web Data Scraper and Aligner (WDSA), International Journal of Computers and Technology (IJCT), 13,3, 4308-4318, 2014

D. S. Gaikwad , U. A. Joglekar, Artificial Neural Network Approach for Classifying Trajectories on Road Network, INTERNATIONAL JOURNAL OF EMERGING TRENDS & TECHNOLOGY IN COMPUTER SCIENCE, 3,4, 156-161, 2014

Electronics and Telecommunication Engineering

D.T.Kushnure, S.D.Biradar, S.S.Muttagi, "PAPR Performance of OFDM System Using Modified SLM Approach," International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, Vol. 2, No. 1, January 2014.

Civil Engineering

S.W.Thakare, P.A.Bokey, “Performance of Geofoam Micropile System for Controlling Heave of Expansive Soil", International Journal of Engineering Science Invention, 3, 9, 32-40, 2014.

First Year Engineering

Nitin A. Jadhav, Pramod K Singh, Hee-Woo Rhee, S. P. Pandey and B. Bhattacharya, Effect of Structure Texture and Morphology Modulation on Efficiency of Dye sensitized Solar Cells, International Journal of Electrochemical Science (9) 5377-88, 2014

Nitin A. Jadhav, Pramod K Singh, Hee-Woo Rhee, and B. Bhattacharya, Effect of variation of average pore size and specific surface area of ZnO Electrode (WE) on Efficiency of Dye sensitized Solar Cells”, Journal of Nanoscale Research Letters., (9) 575-583., 2014

A. P. Hiwrekar, New Mathematical Modeling for Cryptography, Journal of Information Assurance and Security, MIR Lab USA. 9, 027-033, 2014

Mechanical Engineering

CR. Friedrich, E. Baker, S. M. Bhosle , D. Justin, In Vivo Anti-Bacterial Effectiveness Of Nanotextured Titanium Implant Surfaces, Orthopaedic Proceedings, 101, 43-43, 2009

S. M. Bhosle , B. U. Sonawane, P. R. Chitragar, Experimental Determination and Formulation of Mathematical Model for Contact Deformation of Nylon and PVC, Journal of Manufacturing engineering, 5, 38-44, 2010

M.S. Lande , R. S. Tupkar, Optimum Utilization of Bicycle, International Latest Trend in Engineering & Technology (IJLTET) 1, 156-164, 2012

H. P. Borate , N. D. Misal, An Effect of Spacing and Surface Finish on the Performance of Disc Turbine, Int. J. Applied Research In Mechanical Engineering, 2, 25-30, 2012

P. D. Kale , S. B. Naik, G. M. Kakandikar, Heat Shield formability analysis with Taguchi Design of experiments, International Journal on Trends in Advanced Science and Engineering, 5(1), 66-71, 2012

V. B. Bhagwat , R. Manu, A. M. Shreenath, Ductile Mode Machining Simulation of Glass Material Using MATLAB, International Journal of Engineering and Innovative Technology, 2, 1, 2012

Information Technology

S. A. Takale , S. S. Nandgaonkar, Measuring Semantic Similarity between Words Using Web Documents, (IJACSA) International Journal of Advanced Computer Science and Applications, 1,4, 78-85, 2010

S. A. Shinde , A. S. rumale, G. J. Chhajed, J. G. borade, Patient Centric Medical Information System for Tuberculosis Control in India IEEE, 255-259, 2011

T. A. Dhaigude, A. J. Kokare , Energy-Efficient Routing Protocols for Wireless Sensor Network: A Survey, International Journal of Engineering Science and Innovative Technology (IJESIT), 1,2, 179-183, 2012

S. A. Shinde , K. S. Patel, A Review on Spatio-Temporally Continuos Video InPainting, International Journal of Advanced Scientific & Technical Research, 6,2, 132-140,2012

P. M. Patil , Iris Recognition In Less constrained Environment, International Journal of Emerging Technology and Advanced Engineering, 3,7, 196-200, 2013

S. A. Swami , P. S. Vidap, Web Scraping Framework Based on Combining Tag and Value Similarity, International Journal of Computer Science Issues (IJCSI), 6,2, 118-122, 2013

S. A. Swami , P. S. Vidap, Web Data Extraction and Alignment Tools: A Survey, International Journal of Scientific Engineering and Technology (IJSET), 2,6, 573-578, 2013

D. S. Gaikwad , U. A. Joglekar, Classifying Trajectories on Road Network using Neural Network, International Journal of Computer Applications, 81,13, 14-16, 2013

Electronics and Telecommunication Engineering

Kadbe P. K. "Biomedical Image fusion using Wavelet and Curve let Transform," International Journal of Engineering Research and Technology, Vol. 2, May 2013

Civil Engineering

Sharad Gokhale, Ravindra Patil, Uncertainty in modelling PM10 and PM2.5 at a non-signalized traffic roundabout, Atmospheric Pollution Research, 1 59-70, 2010

First Year Engineering

A.G. Sajjan , Spectrofluorimetric determination of Cetrizine hydrochloride in pharmaceutical preparations' Chemia Analityczna, 46 (6), 883-887, 2001

A.G. Sajjan, Spectrophotometric determination of Certain Vicinal dihydroxybenzene derivatives with sodium bismuthate' Journal of Analytical Chemistry, 56, 9, 827 – 829, 2001

A.G. Sajjan Spectrophotometric determination of some Phenothiazine drugs with Iodic acid' Indian Journa of Pharmaceutical Sciences 63, 1, 61-64 2001

A.G. Sajjan , Spectrophotometric determination of Propranolol hydrochloride in pharmaceutical preparations', Indian Journa of Pharmaceutical Sciences, 64, .1, 68-70, 2002

A.G. Sajjan , Spectrophotometric investigations on the assay of phenothiazine drugs', Indian Journa of Pharmaceutical Sciences 64, 6, 603-606, 2002

A. P. Hiwrekar , Determination of orbital mass of a planet, Bulletin of the Marathwada Mathematical Society, 6, 1, 1 -5, 2005

A. P. Hiwrekar Positivity-negativity and comparison principals for elliptic systems Bulletin of the Marathwada Mathematical Society 8, 2, 44-57 2007

A. P. Hiwrekar , Poison domains fit boundaries, and applications, Bulletin of the Marathwada Mathematical Society., 8, 2, 27-43, 2007

Abhijit P. Jadhav, Chang Woo Kim, Hyun Gil Cha, Amol Uttam Pawar, Nitin A. Jadhav , U. Pal and Young Soo Kang, Effect of Different Surfactants on the Size Control and Optical Properties of Y2O3:Eu3+ Nanoparticles Prepared by oprecipitation Method”., J. Phys. Chem. C, 113, 13600–13604, 2009

Umapada Pal, Chang Woo Kim, Nitin A Jadhav and Young Soo Kang , Ultrasound-Assisted Synthesis of Mesoporous ZnO Nanostructures of Different Porosities, J. Phys. Chem. C, 113, 13600–13604, 2009

A. P. Hiwrekar , Extension of Euler’s theorems on homogeneous functions to higher derivatives Bulletin of the Marathwada Mathematical Society, . 10,. 2, 16-19, 2009

Pramod K. Singh, Nitin A. Jadhav , S. K. Mishra, U. P. Singh, B. Bhattacharya , “Application of Ionic Liquid Doped Solid Polymer Electrolyte”, Ionics, 16, 645-648., 2010

A. P. Hiwrekar , A Generalized Hill Cipher Using Matrix Transformation, International J. of Math. Sci. & Engg. Appls. Vol. 5 No. IV, 5 19-23, 2011

Hima Saxena, B Bhattacharya, Nitin A Jadhav , Vivek K Singh, Shashank Shukla, and Pramod K Singh, “Multiwall Carbon Nanotube Doped Ion Conducting Polymer Electrolyte for Electrochemical Application”, Journal of Experimental Nanoscience, 1, 8, 2012

Nitin A. Jadhav , Chang Woo Kim, Umapada Pal, Jinheung Kim, and Young Soo Kang, “Concentration and Temperature Effect on controlling Pore Size and Surface area of Mesoporous Titania by Using Template of F-68 and F-127 Co-Polymer in the Sol-Gel Process”, Journal of Nanoscience and Nanotechnology, 12 5638-5643, 2012

Gurmeet Seharawat, Nitin A. Jadhav , Pramod K. Singh and B. Bhattacharya. Effect of Capping Agent and Different Solvents on Controlling the Particle Size of Cadmium Sulfide, Journal of Scientific and Technical Research, (2) 61-63, 2012

A. P. Hiwrekar , A New Method of Cryptography Using Laplace Transform, International Journal of Mathematical Archive.3(3), 1193-1197, 2012

A. P. Hiwrekar , Positivity-negativity and Embedding Theorems for Elliptic Systems, International Journal of Mathematical Archive, 3(2), 729-738, 2012

Rahul Singh, Nitin A Jadhav , S. Majumder, B. Bhattacharya and P. K. Singh, Novel Biopolymer Gel Electrolyte for Dye-Sensitized Solar Cell Application”, Carbohydrate Polymers, 91 682– 685, 2013

Divya Singh, Nitin A. Jadhav , Pramod K Singh, and B. Bhattacharya, Electrostatic Model of Semiconductor Nano-particles Trapped in Polymer Electrolytes”, Bulletin of Material Science, 36, 6, 977-980, 2013

A. P. Hiwrekar , A New Method of Cryptography Using Laplace Transform of hyperbolic functions, International Journal of Mathematical Archive, .4(2), 208-213., 2013

A. B. Patil , Interpreting Modernism and Postmodernism, Multi-disciplinary International Refereed Research Journal, 1, 9, 48-492013

A. B. Patil , Postmodern Literature: An Overview, Journal of English Studies, 0975-8313, 2013

Patents Applications

Sr. No.	Title	Name of student	Guide Name	Department	Application No.	Status	Date
1.	Smart Unique ID Security System for Next Generation Using Iris Biometric	Ashish Kulkarni	Sudhir Lande Vinay Nagalkar	E&TC	202021004251	Filed	31/01/2020
2.	Low cost Agro Forestry Plant Security System Using Pic Microcontroller	Nilam Kalaskar Shubhangi Khusape Shoba Kuchekar Shivpriya Yadav Vaijnath Khomane	Sudhir Lande Vinay Nagalkar Balasaheb Patil	E&TC	201921046615	Filed	15/11/2019
3.	Next Generation Heating and Location identifier Jacket for Military Personal	Vaijnath Khomane Shivpriya Yadav Swanand Khaladkar Mauli Shinde Elakkiya Sundaram Mayur Shinde Payal Yadav	Sudhir Lande Vinay Nagalkar	E&TC	201921046614	Filed	15/11/2019
4.	Easy Care Smart Water Bottle For Next Generation	Vaijnath Khomane Shivpriya Yadav Swanand Khaladkar Mauli Shinde Elakkiya Sundaram Mayur Shinde Payal Yadav	Sudhir Lande Vinay Nagalkar	E&TC	201921046613	Filed	15/11/2019
5.	Electrical Appliance Monitoring and Saver Device For Institution	Poonam Jadhav. Shubham Hanamante Chaitanya Sable Vaishnavi Kanade Nirmal Kumbhar Sanket Arde	Sudhir Lande Vinay Nagalkar	E&TC	201921046619	Filed	15/11/2019
6.	Antitheft System for Electric Motor Pump	Sourabh Kalebere Pratiksha Gaikwad Anikate Hole	Sudhir Lande Vinay Nagalkar	E&TC	201921046616	Filed	15/11/2019
7.	Design of Automation Sugarcane Cutter with Bud Detection	Aishwarya Fhulari	Sudhir Lande Jyoti Rangole Vinay Nagalkar	E&TC	201921046618	Filed	15/11/2019
8.	Automated cotton Plucking Robot	Rushikesh kale Vaijnath Khomane Nivrutti Kadam Samata Survase Poonam Jadhav Vaishnavi Vidhate Shraddha Raje	Sudhir Lande Vinay Nagalkar	E&TC	201921046617	Filed	15/11/2019
9.	Smart Surface Mounting Device	-	Sudhir Lande Vinay Nagalkar	E&TC	201921046621	Filed	15/11/2019
10.	Multipurpose Egg Hatcher Machine	Paigambar Shaikh Shanno Sayyed Uzma Shaikh	Mrs. Jyoti Rangole	E&TC	201921038268	Filed	-
11.	Low Cost Underwater Glider For Scientific Data Aquisition.	Sohel Shaikh. Shubham Kumbhar. Bhupali Nagane.	Mrs. Jyoti Rangole	E&TC	201921038265	Filed	-
12.	Cotton Sowing mechanis M/Machine For Vidarbha Region	-	Sudhir Lande Vinay Nagalkar	E&TC	201721004159	Filed	06/02/2017

Workshop/ Seminar/Conference/STTP/FEP/Exhibition attended by faculty

Staff Name	Department	Workshop/Seminar/Conference Details	From	Upto	Held & Organised at
Workshop/ Seminar/Conference/STTP/FEP/Exhibition Details (2019-20)
Mr. Anil Bhagat (E&TC) Mrs. Gauri Bhoite (Gen. Sci.)		Attended Workshop on Mentor Development Program by BYST	28/02/2020	29/02/2020	VPKBIET and Organised by BYST
Mr. Akshay Bhapkar (Mech.) Mr. Dipak Yeole(Elect.) Mr. Shrikrishna Kolhar (E&TC) Mr. Hanumant Borate (Mech.) Mr. Keshav Jadhav (Mech.) Mrs. Jyoti Kulkarni (Elect.) Mr. Sahil Shah (IT)		Attended FDP-Introduction to Python Programming	27/02/2020	29/02/2020	VPKBIET and organised by ICT academy
Ms. Sonal Nikam (E&TC)		Attended Workshop on Mentor Development Program by BYST	22/02/2020	23/02/2020	VPKBIET and Organised by BYST
Mr. Sahil Shah (Computer)		Coordinated One Day Workshop on C and CPP	15/02/2020	15/02/2020	RC-VPKBIET Organized by IIT Bombay
Mr. Shashank Biradar (E&TC)		Attended One Day Workshop on C and CPP	15/02/2020	15/02/2020	RC-VPKBIET Organized by IIT Bombay
Mr. Sahil Shah (Computer)		Coordinated One Day Workshop on C and CPP	29/02/2020	29/02/2020	RC-VPKBIET Organized by IIT Bombay
Mr. Shrikrishna Kolhar (E&TC) Mr. Shashank Biradar		Attended "Workshop on Arduino"	08/02/2020	08/02/2020	VPKBIET Baramati Organized by Teaching Learning Centre, IIT Bombay
Ms. Sonal Nikam (E&TC)		Conducted Technology Awareness Program- IOT(Arduino) For school students	28/01/2020	28/01/2020	VPKBIET, Baramati
Mr. Dilip Patil (Civil)		Participated in 2 days SPARC Workshop on Sustainability and durability of concrete structures with by-products and recycled materials	17/01/2020	18/01/2020	IIT Madras Research Park, Chennai.
Mr. Akshay Bhapkar (Mech.)		Attended Workshop- Robotics with python	17/01/2020	19/01/2020	VPKBIET, Baramati
Mr. Akshay Bhapkar (Mech.) Mr. Prasad Galande(Mech.) Mr. Machindra Gaikwad (Mech.)		Attended FDP-Project based learning	11/01/2020	11/01/2020	PCCOE, Pune
Gauri Bhoite (Gen. Sci.)		State Level Workshop on the Occassion of Silver Jubilee Year of IAIAM , Pune on "Applied Mathematics"	09/01/2020	10/01/2020	AISSMS, Pune
Mr. Shashank Biradar (E&TC)		ICT Academy Bridge 2020 Conference	08/01/2020	08/01/2020	ICT Academy, Pune
Mrs. Gauri Bhoite (Gen. Sci.)		Attended One day Workshop on Syllabus Restructure	06/01/2020	06/01/2020	I2IT, Hinjwadi, Pune
Mr. Dilip Patil (Civil)		participated in Science and Engg research board(DST) sponsored National level one week workshop on “Damage detection and characterisation strategy of Non-engineering structures using Piezoelctric Sensors : Theory and Practice”	23/12/2019	27/12/2019	VPKBIET Baramati
Mrs. Jyoti Rangole (E&TC) Mr. Dilip Patil (Civil) Mr. Dipak Yeole (Elect.)		Attended FDP on National Board of Accreditation- Process, System & Criteria	16/12/2019	20/12/2019	S. B. Patil COE, Indapur in association with Savitribai Phule Pune University
Dr. Nitin Jadhav (Gen. Sci.)		Attended FDP on Nanomaterials- Synthesis, Properties and Characterization	16/12/2019	20/12/2019	COEP, Pune
Ms. Sonal Nikam (E&TC)		Conducted one day hands on workshop on Arduino	04/12/2019	04/12/2019	VP's Commerce and Science College, Indapur
Mr. Shashank Biradar (E&TC)		Attended One day Workshop on R	09/11/2019	09/11/2019	VPKBIET Baramati Organized by Teaching Learning Centre, IIT Bombay
Mr. Shashank Biradar(E&TC)		Attended One day Workshop on Linux	23/08/2019	23/08/2019	VPKBIET Baramati Organized by Teaching Learning Centre, IIT Bombay
Mr. Dilip Patil (Civil)		co-ordinated STTP through ICT mode (online) on “Rural Development through Technical Institution (ICT08)” conducted by NITTTR,Kolkata Subject: BEE	29/07/2019	29/07/2019	VPKBIET, Baramati
Mr. Shrikrishna Kolhar (E&TC)		Faculty orientation workshop FE Revised Syllabus 2019 Course Subject: BEE	22/07/2019	22/07/2019	Dr. D. Y. Patil Institute of Technology, Pimpri, Pune Organized by BOS E & TC SPPU Pune
Ms. Sonal Nikam (E&TC)		Coordinated and attended STTP on Deployment of IOT	11/06/2019	15/06/2019	VPKBIET, Baramati
Mr. Anil Bhagat(E&TC)		Attended STTP on Deployement of IOT	11/06/2019	15/06/2019	VPKBIET, Baramati
Mr. Avinash Kokare (IT)		Organized One-Week Summer Internship Program on React JS	10/06/2019	15/06/2019	VPKBIET, Baramati
Workshop/ Seminar/Conference/STTP/FEP/Exhibition Details (2018-19)
Dr. Purushottam Chitragar (Mech.) Mr. Pravin Dhandore (Mech.) Mr. Suraj Kumbhar (Mech.) Mr. Akshay Bhapkar (Mech.) Mr. Prasad Galande (Mech.)		Attended in-plant training at Bharat Forge in Baramati	08/05/2019	13/05/2019	Bharat Forge, Baramati
Mr. Dinesh Zende		Organized one-Week FDP on “Introduction to Artificial Intelligence”	06/05/2019	10/05/2019	VPKBIET with NITTTR Kolkata
Mr. Anil Bhagat		Organized one-Week FDP on “Introduction to Artificial Intelligence”	06/05/2019	10/05/2019	VPKBIET with NITTTR Kolkata
Ms. Shridevi Swami(IT) Ms. Komal Jadhav (Computer)		ICT Academy FDP on Database Programming with PL/SQL	06/05/2019	10/05/2019	Modern Education Society's COE, Pune.
Mrs. Jyoti Kulkarni (Electrical)		One week QIP on "Hands on approach to Semiconductor Phusics Education"	06/05/2019	10/05/2019	IIT, Bombay
Mr. Sahil Shah (Computer)		Attended One week FDP on Artificial Intelligence Applications	06/05/2019	10/05/2019	NITTTER Kolkata at VPKBIET BARAMATI
Dr.C.S.Kulkarni (Computer)		FDP on Academy Cloud Foundation (ACF)	06/05/2019	09/05/2019	Bharati Vidyapeeth,Pune
Dr. Nandkumar Wagh (Electrical)		Attended One week FDP on Artificial Intelligence Applications	03/05/2019	10/05/2019	NITTTER Kolkata at VPKBIET BARAMATI
Mr. Anil Bhagat (E&TC)		Attended One week FDP on Artificial Intelligence Applications	03/05/2019	10/05/2019	NITTTER Kolkata at VPKBIET BARAMATI
Dr. Sudhir Lande (E&TC)		Attended One week STTP on Artificial Intelligence Application Using Paython	03/05/2019	08/05/2019	YCCE Nagpur
Dr. Vipin Gawande(Mech.)		Attended International conference on "Applied Mechanical Engineering Research"	02/05/2019	04/05/2019	NIT Warangal
Dr. Nandkumar Wagh (Electrical)		One day Industry institute interaction meet on Industry 4,0(BRIDGE 19)	27/03/2019	27/03/2019	Hotel Grand Sheraton,Pune
Dr. R S Bichkar(Principal), Dr. Santaji Shinde(Computer), Mr. Dinesh Zende (IT)		Attended a One Day Conference, i.e. "AWS Academy Educators Meet".	26/03/2019	26/03/2019	AWS Academy Educators Meet
Mr. Hafiz Shaikh (Electrical)		Attended 3 Days Training Program on "Train the Trainers".	25/03/2019	27/03/2019	Bharat Forge Ltd. at KCTI, Keshav Nagar, Pune
Dr. Gajanan Dhanorkar (Gen. Sci.)		Presented paper on "Result on common fixed point using cone metric space" in National Conference on "Recent Innovations in Engineering, Science, Technology and Management"	26/02/2019	27/02/2019	Dattakala Group Of Institutions sponsored by S.P. Pune University
Dr. N. B. Wagh (Electrical)		He chaired the Session for "Poster Presentation" during the event "CRETECHNOVA-2K19"	22/02/2019	22/02/2019	CRETECHNOVA-2K19, SVPM's COE, Malegaon
Ms. Snehal Walke (Civil)		Presented paper on "Behaviour of Bacterial Concrete by varying types of Bacteria" International Journal of Innovations In Engineering Research and Technology (IJIERT) ISSN No. 2394-3639, Feb 2019.	15/02/2019	15/02/2019	Dr. D.Y. Patil College of Engineering & Innivation Varale, Pune
Mr. Anil Patil (Gen. Sci.)		Attended and presented his research paper on Studying Salman Rushdie as a Postmodern Writer	08/02/2019	09/02/2019	ELTIS of Symbiosis, Pune
Mr. Deepak Yeole		Presented paper on "Energy Audit: A Case of an Industrial Area", at National Conference on Mathematical Modeling and Computational Intelligence (MMCI - 2K19) and the same paper is published at Journal of Applied Science and Computations (UGC approved journal),ISSN 1076-5131, pp 2367-2372.	16/01/2019	17/01/2019	SBPCOE, Indapur
Ms. Sonal Nikam (E&TC)		Organised workshop on "Arduino" under EESA	Jan. 2019	Jan. 2019	VPKBIET, Baramati
Ms. Sonal Nikam (E&TC)		Organised workshop on "PCB Designung" under EESA	Jan. 2019	Jan. 2019	VPKBIET, Baramati
Mr. Dinesh Zende(IT)		He conducted a session as a Subject Expert on Rural Technologies and Community Development at Syllabus Orientation Workshop for BE-IT 2015 Course.	28/12/2018	28/12/2018	PDEA's College of Engineering at Manjari (Bk) ,Pune.
Mrs. Jyoti Kulkarni(Electrical)		Attended a One-Week Faculty Development Program on Electrical Autocad	24/12/2018	28/12/2018	SKNSCOE, Pandharpur.
Ms. Snehal Walke (Civil)		Attended a One Week AICTE-STTP on "Application of Total Station, Green building Concept and Design of Structures: Field Practices"	24/12/2018	28/12/2018	SBPCOE, Indapur.
Dr. Vipin Gawande(Mech.)		Attended a Two-Day National Workshop on Computational Fluid Dy-namics	21/12/2018	22/12/2018	JSPM’s Jayawantrao Sawant College of Engineering, Pune.
Dr. Samadhan Morkhade(Civil)		Presented a paper in international conference on "Comparative study of hybrid and homogeneous steel beams with web openings"	21/12/2018	21/12/2018	Jadavpur University Kolkata.
Ms. Snehal Walke (Civil)		Attended One Day FDP on "Microsoft Innovative Educator"	22/12/2018	22/12/2018	VPKBIET, Baramati
Mr. Chaitanya Kulkarni(Computer)		Attended a One-Day Faculty Development Program on Laboratory Practice-III.	19/12/2018	19/12/2018	MIT, Kothrud, Pune
Mr. Pravin Dhandore(Mech.)		Participated in a Two-Week Short-Term Training Program on Vali-dation of Mathematical Models with model based designed technique using "MATLAB and Simulink.	10/12/2018	21/12/2018	Smt. Kaskhi-bai Nawale College of Engineering, Pune.
Dr. Gajanan Dhanorkar (Gen. Sci.)		Attended QIP Short term program on "Computational Methods for Integral and Differential Equations (CMIDE 2018)"	10/12/2018	16/12/2018	Indian Institute of Technology (BHU), Varanasi
Dr. Manisha Lande (Mechanical)		Attended Two week DST sponsored Faculty Devlopment Programme in Entrepreneurship	03/12/2018	13/12/2018	VPKBIET, Baramati
Mrs. Jyoti Kulkarni(Electrical)		Attended one week STTP through ICT Mode on Indian electricity Rules and Codes of practices	26/11/2018	30/11/2018	VPKBIET, Baramati
Mr. Hafiz Shaikh(Electrical)		Attended International Conference on Recent Ad-vances and Innovations in Engineering	22/11/2018	25/11/2018	IEEE, Jaipur
Dr. Samadhan Morkhade(Civil)		Participated in 1 week training programme on "Wind Effects on Structures"	29/10/2018	02/11/2018	VNIT Nagpur
Dr. Sachin Bhosle (Mech.) Mr.Anil Disale(Gen. Sci.) Dr.Nitin Jadhav (Gen. Sci.) Mrs. Jyoti Rangole (E & TC) Dr.Gajanan Dhanorkar(Gen. Sci.) Mr.Anil Patil (Gen. Sci.)		Train the Trainer	24/10/2018	24/10/2018	VIIT, Baramati-Conducted by Department of Industrial Policy and Promotion, Invest India, Skill Development and Enterpreneurship department, Government of Maharashtra and Maharashtra state Innovation Society
Mrs. Gyankamal Chhajed Mr. Mukesh Rangdal Ms. Pallavi Jawalkar (Computer)		Attended a Two-Day Faculty Development Program on Introduction to R Pro-gramming	03/10/2018	04/10/2018	Tuljaram Chaturchand College in Baramati
Mr. Vinay Nagalkar (E&TC)		Conducted a Two-Day Workshop on "AVISHKAR Maharashtra State Inter- University Research Festival"	17/09/2018	17/09/2018	Sant Gadge Baba Amravati University Amravati
Dr. Vipin Gawande(Mech.)		Attended International conference on "Applied Mechanical Engineering Research"	02/05/2019	04/05/2019	NIT Warangal
Mr. Dinesh Zende (IT)		Participated a Workshop on "AI and Deep Learning"	13/08/2018	13/08/2018	Bennett University and KLE Technological University at Hubli.
Mr. Suraj Kumbhar (Mech)		Attended the Syllabus Implementation Workshop on -Energy Audit and Management (2015 pattern) for BE	17/07/2018	17/07/2018	JSPM Narhe Technical Campus at Narhe
Ms. Sonal Nikam (E&TC)		Attended One Day faculty development program on Internet of Things	12/07/2018	12/07/2018	MMCOE,Pune
Mr. Pravin Dhandore		Attended Syllabus Implementation Workshop on "Dynamics of Machinery" for BE Subjects	30/06/2018	30/06/2018	Jaywantrao Sawant College of Engineering ,Hadapsar, Pune
Mr. Deepak Yeole (Electrical) Mrs. Jyoti Kulkarni (Electrical)		One day workshop on "LATEX"	23/06/2018	23/06/2018	VPKBIET, Baramati
Mr. Keshav Jadhav Mr. Machindra Gaikwad		Attended a One-Week AICTE-ISTE sponsored Induction Pro-gram on “Basics of Technical Research Paper Writing for Index Journals”	18/06/2018	23/06/2018	P R Pote College of Engineering and Management in Amravati.
Mrs. Jyoti Kulkarni Mr. Deepak Yeole		Attended a One-Week Faculty Training Program on "Trends and Practices in Electron-ics/Electrical Manufacturing Industries"	11/06/2018	15/06/2018	L&T Training Centre, Madh Island in Mumbai
Ms. Monali More		Attended a One-Week AICTE and ISTE approved STTP on "Research Op-portunities and Challenges in Engineering"	11/06/2018	15/06/2018	SVPM College of Engineering in Malegaon
Workshop/ Seminar/Conference/STTP/FEP/Exhibition Details (2017-18)
Mr. Samadhan Morkhade	Civil	Organised two days workshop on "Steel Design-Bridging the Gaps: Theory & Practice."	13/01/2018	14/01/2018	VPKBIET, Baramati
Mrs. Jyoti Kulkarni	Electrical Engg.	attended a STTP on Renewable Energy Source for Sustainable Development	25/12/2017	30/12/2017	VJTI,Mumbai
Ms. Shridevi Swami Ms. Rohini Kokare	IT	Attended Two Days State Level Workshop on "Smart Agriculture using Internet of Things"	23/12/2017	24/12/2017	VIT,Pune
Mr. Govind Devasuth	Electrical Engg.	attended the 8th National Power Electronics Conference, 2017 (NPEC-17)	18/12/2017	20/12/2017	College of Engineering, Pune
Mr. Dinesh Zende	IT	coordinated a two-day Faculty Development Program on "Introduction to Machine Learning"	16/12/2017	17/12/2017	Saptahaant Shikshak Prashikshan (SSP) by IIT Kharagpur
Mr. Machindra Gaikwad	Mechanical Engg.	presented his research paper entitled "Combustion Characteristics of Bio-methane-Diesel Dual Fueled CI Engine in the Existence of EGR"	15/12/2017	16/12/2017	NIT,Surathkal
Mr. Anil Patil	General Sci & Engg.	attended and presented his research paper in the International Conference on "Language, Literature and Culture"	15/12/2017	17/12/2017	Institute of Advanced Studies in English, Pune
Dr. Nitin Jadhav Mr. Anil Disale	General Sci & Engg.	attended and presented paper in International Conference on "Applied Nanotechnology and Nano Sciences"	07/12/2017	09/12/2017	TC College, Baramati
Dr. Nitin Jadhav Mr. Anil Disale	General Sci & Engg.	attended and presented paper in International Conference on "Applied Nanotechnology and Nano Sciences"	07/12/2017	09/12/2017	TC College, Baramati
Mr. Rohit Tarade Mr. Nikhil Sardar	Electrical Engg.	attended a Workshop on "Effective Teaching and Learning of Smart Grid and Microgrid Technologies (SGMGT)"	04/12/2017	08/12/2017	NIT Warangal
Mr. Madhav Arotale	E & TC	Organized a two day workshop on Hands-on Arduino - Uno under ISTE chapter	09/09/2017	10/09/2017	VPKBIET, Baramati
Mr. Shrikrishna Kolhar Mr. Sachin Trankatwar Dr.Rajveer Shastri Ajinkya Bankar	E & TC	Organized a Two-Day Workshop on Robotics: Firebird V Robotic Platform	11/06/2017	11/06/2017	VPKBIET, Baramati
Dr.Sachin Bhosle	Mechanical	Published Paper 'Wetting behavior and chemistry of titanium nanotubular orthopedic surfaces: Effects of aging and thermal annealing', Springer Journal of Bio-Tribo Corrosion (2017) 3:26. DOI: 10.1007/s40735-017-0085-0.	-	-	-
Dr.Sachin Bhosle	Mechanical	Published Paper 'Facile synthesis of nanosilver-incorporated antibacterial titanium nanotube surfaces', Springer Journal of Bio-Tribo Corrosion 3:35 (2017). DOI:10.1007/s40735-017-0095-y..	-	-	-
Dr.P. R. Chitragar	Mechanical	Published Paper Chitragar, Parashuram R., K. V. Shivaprasad, and G. N. Kumar. 'Experimental Analysis of Four Cylinder 4-Stroke Gasoline Engine Using Hydrogen Fractions for Performance and Emission Parameters.' No. 2017-26-0063. SAE Technical Paper, 2017.	-	-	-
Mr.P.M. Patil Mr.K.S. Bhagwat	Electrical	One-Day Faculty Development Programme on Software Lab I and DBMS.	13/06/2017	13/06/2017	Cummins College of Engg, Pune
Mr. Govind Devasuth	Electrical	Presented Research Paper at Second International Conference on New Frontiers of Engineering, Science, Management and Humanities	11/06/2017	11/06/2017	National Institute of Technical Teachers Training and Research (NITTTR) Chandigarh
Ms. Ashwini Bankar Ms. Nirvikalpata Bhosle	E & TC	Two-Week Training Program on Rockwell Automa-tion PLC and SCADA programming	05/06/2017	15/06/2017	Advanced Training Institute,Sion,Mumbai.
Workshop/ Seminar/Conference/STTP/FEP/Exhibition Details (2016-17 )
Mr. P. R. Chitragar	Mech	Attended (IES-2017) and Spring Internship program (SIP-2017)	27/02/2017	07/03/2017	Kumamoto University Kumamoto, Japan
Mr. Madhav Arotale	E & TC	Organized workshop on "Raspberry Pi" under IETE	11/02/2017	12/02/2017	VPKBIET, Baramati
Mr. Madhav Arotale	E & TC	Organized workshop on "Hands on Arduino" Under ISTE	6/02/2017	9/02/2017	VPKBIET, Baramati
Mr.C. B. Nayak	Civil	International Conference on Advanced Material Technologies (ICAMT)-2016.	28/12/2016	28/12/2016	Dadi Institute of Engineering and Technology, Visakhapatnam, AP
Mr.Dinesh Zende	IT	Specialized Training Workshop on "Data Science"	27/12/2016	31/12/2016	ViMEET, Khalapur
Mr.Digambar Padulkar	Computer	Specialized Training Workshop on "Data Science"	27/12/2016	31/12/2016	ViMEET, Khalapur
Mr. Vishal Bhagwat	Mech	Workshop of Avishkar	24/12/2016	24/12/2016	PCCOE, pune
Mr. Devidas Kushnure	E & TC	Faculty Development Program (FDP) on Microprocessor Laboratory (210257) (2015 Course)	23/12/2016	23/12/2016	SPPU, Pune at MESCOE, Pune
Dr. Rajveer Shastri Mrs. Aparna Shastri	E & TC	IEEE Bombay Section syposium	21/12/2016	22/12/2016	VPKBIET, Baramati
Mrs. Aparna Shastri	E & TC	A hands-on tutorial on Programming Embedded Systems	20/12/2016	20/12/2016	VPKBIET, Baramati
Dr. Rajveer Shastri Mr. S. R. Kolhar	E & TC	IEEE Tutorial on Embedded System	20/12/2016	20/12/2016	VPKBIET, Baramati
Mr. Vishal Bhagwat	Mech	'Techno-Societal 2016'	19/12/2016	19/12/2016	SVERI's COE Pandharpur
Mr. Shantanu Jagdale	E & TC	Two days workshop on Optical fiber Communication and wireless communication	19/12/2016	20/12/2016	IIT, Delhi
Mr. Ajinkya Bankar Mr. Shrikrishna Kolhar	E & TC	Conducted Workshop on PCB Design	16/12/2016	17/12/2016	VPKBIET,Baramati
Mr. P. N. Arotale	E & TC	Five days workshop on "Brain Science and Technology"	14/12/2016	18/12/2016	IIT Delhi
Dr. Rajveer Shastri Mr. S. U. Kolhar Mr. A. S. Bankar Mr. S. R. Trankatwar	E & TC	workshop on "Introduction to Robotics"	9/12/2016	10/12/2016	e-Yantra Lab Setup Initiative (e-LSI) by IIT Bombay.
Mr. Anil Hiwarekar	General Sci. & Engg.	ICMAA 2016	2/12/2016	2/12/2016	Indian Institute of Technology, Roorkee
Mr. Vishal Bhagwat	Mech	AVISHKAR 2016	2/12/2016	2/12/2016	VIIT, Kondhwa, Pune
Mr. Keshav Jadhav	Mech	Advanced I.C. Engine Technology	21/11/2016	24/11/2016	IIT Madras
Mrs. Sheetal Takale	IT	9th ACM Compute	21/10/2016	23/10/2016	Gandhinagar
Ms. S.D Rokade Mr. R.S Tarade	Electrical	PLC & SCADA workshop	16/10/2016	18/10/2016	Organised by BITS Electronics at VPKBIET Baramati
Mr. Vishal Bhagwat	Mech	Innovation-2016 Regional Research Conference	6/10/2016	6/10/2016	SPPU, Pune at RSCOE Pune
Mr. Vikas Deshmukh Dr. Rajveer Shastri Mr. Devidas Kushnure	E & TC	Innovation-2016 Regional Research Conference	6/10/2016	6/10/2016	SPPU, Pune at RSCOE Pune
Mr. Govind Devsuth	Electrical	Solar Photovoltaic and Hybrid Wind Energy Systems	17/9/2016	17/9/2016	The Prerana Energy Professionals Co-operative Society Ltd., Pune.
Mr. Dadasaheb Rupanwar	Mech	Digital Photoelasticity by DigiTFP	18/9/2016	18/9/2016	IIT, Madras
Mr. Dadasaheb Rupanwar	Mech	Digital Optical Measurements: Digital Photoelasticity and Digital Image Correlation	12/9/2016	17/9/2016	IIT, Madras
Dr. Rajveer Shastri	E & TC	IEEE Workshop on Internet of Things	05/8/2016	07/8/2016	Amrita University Banglore
Mr. Shriniwas Shelge	Mech	Finite Element Method	14/7/2016	14/7/2016	IIT Hyderabad
2015-16
Mr.Sachin Trankatwar	E & TC	FDP on "Digital Electronics and Logic Design"	17/6/16	18/6/16	I2IT, Hinjawadi, Pune
Mr.G. N. Narule, Mr.U. Jagdale, Ms. B. Sawant and Ms. S. Reshmukh	Civil	Visit to the Exhibition at Centenary Open House. It was organised by CWPRS	14/6/16	14/6/16	CWPRS (Central Water and Power Research ) Khadakwasla, Pune
Mr. Anil Bhagat	E & TC	presented paper in national conference on "Automatic Vehicle Accident Detection and Messaging System Using GSM and GPS"	15/6/16	15/6/16	MIT Alandi, Pune
Mr. Sachin Trankatwar	E & TC	Design of combinational circuits using QCA Technology	9/6/16	11/6/16	Sinhgad Academy of Engineering, Kondhwa, Pune
Mr. Anil Bhagat	E & TC	Two Days Faculty orientation workshop of SE (E&TC) Revised syllabus 2015 of subject Electronic Measuring Instruments and Tools	9/6/16	10/6/16	VIIT Kondhwa Pune
Mr. Dilip Patil	Civil	Internship at Town Planning Department, Baramati	7/6/16	14/6/16	Town Planning Department, Baramati
Mr. Madan Jadhav	E & TC	Summer faculty Research Fellowship (SFRF-2016)	18/5/16	30/6/16	IIT, Delhi
Mrs. Kanchan Bhale	IT	Two months Summer Research Fellowship	15/4/16	10/6/16	IDRBT, Hyderabad
Mrs. Sheetal Takale	IT	9th Doctoral Thesis Conference	21/4/16	22/4/16	Hyderabad
Mr. Ajinkya Bankar	E & TC	Design of combinational circuits using QCA Technology	21/4/16	22/4/16	IETE Cynosure, NCCEEE-2016 at BATU Lonere
Dr. Rajveer Shastri Mrs. Aparna Shastri	E & TC	Indian Medical Device Expo (IMDE)2016	8/4/16	10/4/16	CoE Pune
Mr. P. N. Arotale	E & TC	Speech Source modelling & its Application	8/4/16	8/4/16	DAIICT Ghandhinagar
Mr. Dilip Patil Ms. Jyoti Bhong	Civil	Workshop on Advanced Surveying using total Station by Prof. Ashish Kale	18/3/16	18/3/16	VPKBIET, Baramati
Mr. Anil Bhagat Ms. Jyoti Bhong	E & TC	Paper presented in international conference on "Comparative Analysis of Image Enhancement Techniques"	3/3/16	5/3/16	DMI College of Engineering, Chennai, Tamilnadu, India
Mr. Dinesh Zende	IT	Organized QIP Workshop on "Graph Theory and its Applications" sponsored by SP Pune University	4/3/16	5/3/16	VPKBIET, Baramati
Mr. Avinash Kokare Mr.V.V.Rampurkar	IT	Workshop on Algorithms in Engineering	15/02/2016	19/02/2016	IIT, Guwahati
Mr. Anil Patil	General Sci. & Engg.	6th National Conference on Communication Plus	05/02/2016	06/02/2016	Symboisis Institute Pune
Mr.D.D.Rupanwar Mr. Swapnil Taware	Mechanical Engineering	BCUD sponsored Two Days workshop on Virtual Instrumentation Using LabVIEW & Data Acquisition System	21/01/2016	22/01/2016	MES's College of Engineering, Pune
Mr. Santosh Shinde Mr. Rajaram Ambole	Computer Engineering	FDP on CL-III	15/01/2016	16/01/2016	G H Raisoni Institute and Technolgy Wagholi Pune
Mr. Vikas Deshmukh	E & TC	One Day Workshop on Convaction Ceremony	13/01/2016	13/01/2016	Modern Arts, Sci, Com College Shivajinagar Pune
Mr. Dinesh Zende	IT	One Day Workshop on Convaction Ceremony	13/01/2016	13/01/2016	Modern Arts, Sci, Com College Shivajinagar Pune
Mr. Nagesh Kulkarni	E & TC	India Eelctronics Week(IEW)2016	11/01/2016	13/01/2016	Bangalore Exhibition Centre Bangalore
Mr. Madan Jadhav	E & TC	Faculty Orientation Workshop on Mobile Communication (BE-EnTC)	9/01/2016	9/01/2016	Rajshree Shahu College of Engineering, Pune
Mr. Shrihari Muttagi	E & TC	Faculty Orientation Workshop for Wireless Network (Elective - IV)	9/01/2016	9/01/2016	BVCOEW, Pune
Ms. Mrunmayi Katkar	Computer Engineering	Workshop on Big Data and Hadoop	5/01/2016	9/01/2016	VIIT, Baramati
Dr. Anil Hiwarekar	General Sci. & Engg.	National Conference :- 81st Annual Mathematics Conference	27/12/2015	30/12/2015	VNIT Nagpur
Mr. Sanjay Shirke Mr. Dilip Deokate Mr. Pravin Suryawanshi Mr. Dayaynand Sonawane	Principal's Office	One Day Workshop on Effective Use of IT in Office Management	19/12/2015	19/12/2015	Sangamner Art's College Sangamner
Ms. Kshitija Upadhyay Mr. Suraj Dhanawe	Computer Engineering	Android Workshop at VPCOE, Baramati	18/12/2015	19/12/2015	VPCOE, Baramati
Mr. Sahil Shah	IT	FDP on Implementation of Advanced Databases Lab BE-IT at SCOE, Pune	19/12/2015	19/12/2015	SCOE, Pune
Mr. Ranjit Kolkar	IT	FDP on Implementation of Elective-III, Mobile Computing BE-IT	18/12/2015	18/12/2015	Sinhgad College of Engineering, Pune
Mrs. Sujata Kulkarni	Mechanical Engineering	Syllabus Implementation Workshop : Indutrial Engineering ( BE-Mech)	18/12/2015	18/12/2015	S K N College of Engineering, Vadgaon Pune
Dr. Nirmal Sahuji	General Sci. & Engg.	International Conference on Python for Education and Scientific Computing	14/12/2015	16/12/2015	Indian Institute of Technology,Bombay
Ms. Snehal Deshmukh	Civil Engineering	Dams And Hydraulic structures	08/12/2015	09/12/2015	Pimapri Chinchwad College of Engineering Pune
Mr. Dilip Patil Mr. Umesh Jagdale	Civil Engineering	STTP on Repair , Retrofitting and Strengthing of Building	07/12/2015	11/12/2015	Dr. J. J. Magdum College of Engineering, Jaysingpur
Dr. Anil Hiwarekar	General Sci. & Engg.	National Conference Organized on "Technology & Innovations in Math Education - (TIME-2105)"	04/12/2015	07/12/2015	VPCOE, Baramati
Mr. Ajit Chaudhari Sandeep Zarekar	Mechanical Engineering	Industrial Training at Piaggio Vehicle Pvt ltd, Baramati	01/12/2015	15/12/2015	Piaggio Vehicle Pvt ltd, Baramati
Mr. Deepak Sonawane Mrs. Gauri Bhoite	General Sci. & Engg.	STTP on Understanding Application of Mathematics in Engineering Discipline	23/11/2015	28/11/2015	VIIT Pune
Mr. Deepak Sonawane Mrs. Gauri Bhoite	General Sci. & Engg.	STTP on Understanding Application of Mathematics in Engineering Discipline	23/11/2015	28/11/2015	VIIT Pune
Mrs. Kanchan Bhale Ms. Shridevi Swami	IT	IEEE WIE Symposium 2015	07/11/2015	08/11/2015	IEEE Bangalore Section at Amrita School of Engineering, Bangalore
Mrs. Varsha Surwase	E & TC	IEEE WIE Symposium 2015	07/11/2015	08/11/2015	IEEE Bangalore Section at Amrita School of Engineering, Bangalore
Mrs. Sheetal Takale	IT	The 16th International Conference on Web Information System Engineering (WISE-2015).	01/11/2015	03/11/2015	Miami Florida, USA
Mr. Swapnil Taware Shrikant Mahadik	Mechanical Engineering	Training program "Train the Trainers"	10/09/2015	12/09/2015	Bharat Forge Ltd, Pune
Mr. Shrinivas Shelge	Mechanical Engineering	One Day Workshop on LATEX	29/08/2015	29/08/2015	Indian Institute of Technology, Mumbai
Mr. Rajaram Ambole	Computer Engineering	One Day Workshop on LATEX	29/08/2015	29/08/2015	Indian Institute of Technology, Mumbai
Mr. Prashant Raut	IT	One Day Workshop on LATEX	29/08/2015	29/08/2015	Indian Institute of Technology, Mumbai
Mr. Apurv Vaidya	Civil Engineering	One Day Workshop on LATEX	29/08/2015	29/08/2015	Indian Institute of Technology, Mumbai
Mr. Santosh Kare	IT	Faculty Development Programme "Revision of Outcome Assessment Processes"	19/08/2015	19/08/2015	PVG College of Engineering, Pune
Mr.Mahesh G. B.	Civil Engineering	Free & Open Geospatial Technologies( FOSS4G) for Urban Environmental Application	21/08/2015	24/08/2015	Indian Institute of Sciences, Banglore
Mr. Prashant Raut	IT	Faculty Development Programme " Revision of Outcome Assessment Processes"	19/08/2015	19/08/2015	PVG College of Engineering, Pune
Mr. Keshav Jadhav	Mechanical Engineering	Meeting on Syllabus Implementation for BE-Mech Engg-2012 Course- RAC Subjects	05/08/2015	05/08/2015	MIT College of Engineering, Pune
Mr. Keshav Jadhav	Mechanical Engineering	Meeting on Syllabus Implementation for BE-Mech Engg-2012 Course- RAC Subjects	05/08/2015	05/08/2015	MIT College of Engineering, Pune
Mr. Keshav Jadhav	Mechanical Engineering	Meeting on Syllabus Implementation for BE-Mech Engg-2012 Course- RAC Subjects	05/08/2015	05/08/2015	MIT College of Engineering, Pune
Mr. Shriniwas Shelge	Mechanical Engineering	Regional Research Conference "Innovation-2015"	01/07/2015	01/07/2015	MES's College of Engineering, Pune
Mr.Madan Jadhav	Electronics & Telecomm. Engg.	Regional Research Conference "Innovation-2015"	01/07/2015	01/07/2015	MES's College of Engineering, Pune
Mr.Madan Jadhav Mr.B.H. Deokate Mr.Premanand Kadbe Mr.Ajinkya Bankar Mr.Shashank Biradar Mr.D.T. Kushnure	Electronics & Telecomm. Engg.	Regional Research Conference "Innovation-2015"	01/07/2015	01/07/2015	MES's College of Engineering, Pune
Mr. Prashant Raut	IT	Workshop on "Discussion of Software Modeling & Design and Software Laboratory IV for BE-IT 2012 Course"	30/06/2015	30/06/2015	MKSSS's Cummins College of Engineering For Women
Mr. Sahil Shah Mr. Dinesh Zende	IT	Summer Faculty Research Fellowship Program ( SRPF 2015)	14/05/2015	27/06/2015	Indian Institute of Technology, Delhi
Mr. Parshuram Arotale	Electronics & Telecomm. Engg.	Workshop on "Medical Imaging(MRI)"	19/06/2015	21/06/2015	CUDA Center, Indian Institute of Technology, Mumbai
Mr. Sandeep Bavkar	Electronics & Telecomm. Engg.	3 Day State Level Workshop on "Embedded Linux Development on ARM"	17/06/2015	19/06/2015	Sinhgad Institute of Technology, Lonawala, Pune
Mr. Ashok Jadhav	Electrical Engineering	STTP on Optimization and Game Theory: From Basics to latest trends	15/06/2015	19/06/2015	Indian Institute of Technology, Mumbai
Mr. Ajinkya Bankar	Electronics & Telecomm. Engg.	Faculty Orientation Workshop for Subject VLSI Design and Technology / VLSI Design	11/06/2015	13/06/2015	Sinhgad College of Engineering, Pune
Mr. Sonal Nikam	Electronics & Telecomm. Engg.	Faculty Orientation Workshop for BE- E& TC, Rev. for Subject Computer Networks	11/06/2015	13/06/2015	AISSMS College of Engineering, Pune
Ms. Peshave Juie	Electronics & Telecomm. Engg.	Faculty Orientation Workshop for BE- E& TC, Rev. for Subject Digital Image Processing	11/06/2015	13/06/2015	AISSMS College of Engineering, Pune
Mr. Sandeep Bavkar	Electronics & Telecomm. Engg.	Faculty Orientation Workshop for BE- E& TC, Rev. for Subject Embedded Systems & RTOS	11/06/2015	13/06/2015	Smt. S. K. N. College of Engineering, Pune
Mr. Shashank Biradar	Electronics & Telecomm. Engg.	Workshop on Multi Rate and Adaptive Signal Processing	11/06/2015	13/06/2015	College of Engineering Pune
Mr. Devidas Kushnure	Electronics & Telecomm. Engg.	Faculty Orientation Workshop for BE- E& TC, Rev. for Subject Software Defined Radio	12/06/2015	12/06/2015	MES's College of Engineering, Pune
Mr. C. B. Nayak	Civil Engineering	One Day Workshop on BE Civil (2012 Course) Syllabi Drafting	10/06/2015	10/06/2015	AISSMS's College of Engineering, Pune
Mr. Ashok Jadhav	Electrical Engineering	One Week FDP on "Nature Inspired Computations in Engineering(NICE)"	18/05/2015	22/07/2015	BATU, Lonere

Institutional Social Responsibility

Title of Training Program	Date conducted	Beneficiaries
Internet of Things (Arduino)	12th Feb. 2020	VP’s Marathi Medium School, Baramati (IX Std. Students)
IOT(Arduino)	28th Jan. 2020	VP’s New English Medium School(8th to 10th Std. Students)
Web Designing & Mobile App Development	25th Jan. 2020	VP’s New English Medium School(8th to 10th Std. Students)
Python Basics and Opportunity	21st Jan. 2020	VP’s English Medium School CBSE(11th Std. Students)
3D Printing & 3D Modelling	13th Jan. 2020	VP’s English Medium School CBSE(11th Std. Students)

IPR Training Programme

Title of Training Program	Date conducted	Beneficiaries
Importance of IPR in Research and Entrepreneurship	27th & 28th Feb. 2020	Second Year Mechanical and Civil Engineering students
Importance of IPR in Research and Entrepreneurship	2nd & 3rd Mar. 2020	Second Year E & TC Engineering students
Importance of IPR in Research and Entrepreneurship	4th & 5th Mar. 2020	Second Year Electrical Engineering students

Faculty deputation @ PhD Research

Dr. D. B. Hanchate (Computer Engg)- @ SGGS, Nanded(Completed 2007-2016).
Dr. S.M.Bhosle (Mechanical Engg)- @Michigan Technological University, USA (Completed 2014 -17).
Dr. P. R. Chitragar (Mechanical Engg) - @NIT Surathkal (Completed 2013-2018).
Dr. S. A. Takale (Info. Tech.) - @ Shivaji University, Kolhapur (Completed 2011-2018)
Dr. G. N. Narule (Civil Engg) - @ Mumbai University (Part-time, Completed 2014-2019)
Dr. Vinay Nagalkar (E&TC Engg)- @ Sant Gadge Baba Amravati University (2014 - 2020).
Mr. P. M. Patil (Info. Tech.)- @ Satyabhama University, Chennai (2011 - Pursuing).
Mr. A. H. Kolekar (Mechanical Engg) [email protected] Bombay (2012 - Pursuing).
Mr. P. M. Paithane (Computer Engg)- @ B. A. M. U. Aurangabad (2016 - Pursuing).
Mrs. G. J. Chhajed (Computer Engg)- @ Bharati Vidyapeeth (2017 - Pursuing).
Mr. P. N. Arorale (E&TC Engg)- @ North Dakota University, USA (2018 - Pursuing).
Mr. Ajinkya Bankar (E&TC Engg) - @ Florida Int. University, USA (2018 - Pursuing).
Mr. S. A. Shinde (Info. Tech.) - @ KL University, Vijaywada (2018 - Pursuing).
Mr. Manoj Shelar (Computer Engg.) - @ KL University, Vijaywada (2018 - Pursuing).
Mr. S. D. Biradar (E&TC Engg)- @B.A.T.U. Lonere (2018 - Pursuing).
Mr. S. S. Jagdale (E&TC Engg) [email protected] Lonere (2018 - Pursuing).
Mr. D. A. Zende (Info. Tech. ) - @ B.A.T.U. Lonere (2019 - Pursuing).
Mrs. P.D. Kale (Mechanical Engg) - @ S.P.Pune University (Part-time, November 2019 - Pursuing).
Mr. S.H. Kumbhar (Mechanical Engg) - @ S.P.Pune University (Part-time, November 2019 - Pursuing).
Mr. H. P.Borate (Mechanical Engg) - @ Punyashlok Ahilyadevi Holkar Solapur University (Part-time, November 2019 - Pursuing)
Mr. Avinash Kokare (Info. Tech.)- @ Bharati Vidyapeeth (2020 - Pursuing).

Categorization of UG Projects

Categorization of UG Projects (2019-20) @ VPKBIET

Demostrates variety of Projects with stated project-outcomes

Students Success @ Project Competitions

"NAVONMESH-2020",AIC-ADT Baramati Foundation.
Name of Project Title		Team Members Name	Guide Name	Prize
Design of Automated Sugarcane cutter with Bud Detection		Aishwarya Fulari Anuj Fulari Shubham Kumbhar Amol Pawar	Mrs. Jyoti Rangole	2nd prize, trophy with a Cash Price of Rs. 7000
About Avishkar Competition This activity, unique in its nature and Savitribai Phule Pune University has taken special efforts to increase the participation of the talented students from rural and urban areas. To inculcate research culture among students. To encourage original and novel thinking. To provide an opportunity for expression of academic talent. To promote interaction among academia, R & D Institutes and Industries.
Avishkar Competition 2019-20 (First Round Result)
Computer Engineering
Sr. No.	Name of Project Title	Team Leader Name	Guide Name	Status
1.	Smart Vehicle System	Ms.Ashwini Kashid	Dr. C. S. Kulkarni	Submitted
2.	E-Voting Sytem	Ms.Swati Waghmode	Dr. C. S. Kulkarni	Submitted
Civil Engineering
1.	Comparative Study for Effective Design	Ms.Sayalee Chavan	Dr. S. G. Morkhade	Submitted
2.	Behaviour of Steel Hybrid	Tushar Shirke	Dr.S.G.Morkhade	submitted
Mechanical Engineering
1.	Real time surveillance by drone	Mr. Shubham Kadam	Dr. S. M. Bhosle	Submitted
2.	Stress Corrosion Cracking Behavior	Mr.Rutvij Bhide	Dr. Shirish Bali	submitted
3.	Water Purification using Solar Energy	Mr. Aditya Akkalkote	Mrs. P.D. Kale	submitted
4.	Pesticide inhalation averting helmet	Mr. Yogesh Chillarge	Dr. Vipin B. Gawande	submitted
5.	A Novel Technique for bagasse	Mr. Dhiraj Annadate	Mr. M. S. Gaikwad	submitted
6 .	Geometric Variation of gear	Mr. Rohit Chaudhari	-	submitted
Information Technology
1.	Smart Sugarcane Crop Growth	Mr. Someshwar Terkar	Ms. K.S. Jadhav	Submitted
2.	A Block chain based higher education credit platform	Ms. Ashwini Patil	Ms. K.S. Jadhav	Submitted
3.	Detection of Soil Fertility	Mr. Pravin Thokal	Mr. P. M. Patil	Submitted
4.	Block chain in Government Sector	Mr. Vikrant Borawake	Mr. S.S. Kare	Submitted
5.	Online Video Game	Mr. Vikrant Borawake	Dr. S.A. Takale	Submitted
6.	Nigrani Smart Home automation	Mr. Abhishek Mankar	Mrs. K.M. Bhale	Submitted
7.	Lung Cancer Detection Using Image Processing	Ms. Prerana Mhaske	Mr. D.S. Gaikwad	Submitted
Electronics and Telecommunication Engineering
1.	Easy care smart water	Ms.Payal Yadav	Mr.Vinay Nagalkar	Submitted
2.	New Generation Heating jacket for milatry personal	Mr. Swanand Khaldakar	Dr. Sudhir Lande	Submitted
First Year Engineering
1.	Efficient sensitized solar cells	Ms. Aishwarya Durande	Dr. Nitin A. Jadhav	Submitted
2.	Degradable Plastic: Alternative to conventional	Ms. Pooja Pawar	Dr. Nitin A. Jadhav	Submitted

Participation in SPPU's AVISHKAR 2019 Competition" (A State Level Project Competition). Registrations for First Round:
Name of Department	Total Count Registration
Mechanical	06
IT	07
Computer	02
E&TC	02
Civil	04
FE	02
Total	23

KPIT Sparkle 2019-2020 First Round Shortlisted Teams
Sr. No.	Name of Leader	Name of Mentor	Department
1.	Vivek Kumbhar	Dr.Nandkumar Wagh	Electrical
2.	Khade Vaishali	Dr.Nandkumar Wagh	Electrical
3.	Ashwini Kolekar	Dr.Nandkumar Wagh	Electrical
4.	Mithun Jadhav	Dr.Nandkumar Wagh	Electrical
5.	Amol Pawar	Mrs. Jyoti Rangole	E&TC
6.	Shraddha Kalyankar	Mr. Shashank Biradar	E&TC
7.	Swanand Khaladkar	Mr. Shashank Biradar	E&TC
8.	Ashwini Kashid	Dr.Chaitanya Kulkarni	Computer
9.	Ravi Kamble	Dr.Chaitanya Kulkarni	Computer

SIH 2018-19 Winners

Students of Electronics and Tele. Department have won First prize in Smart India Hackathon 2019 held at DSU Banglore Nodal Center. They received
incubation and cash prize of Rs. 50000/- from Mahyco MNC. During SIH 2019 students interacted with ISRO Scientist and Directors of MNC and got
exposure to current cutting edge technologies. Surgical strike team has mentored and guided by Prof. Vinay Nagalkar

Team: Surgical Strike.
    1) Mr. Rushikesh Kale.
    2) Mr. Nivrutti Kadam.
    3) Miss. Samata Surwase.
    4) Miss. Shraddha Raje.
    5) Miss. Vaishnavi Vidhate.
    6) Miss. Poonam Pawar.
    7) Mr. Vaijnath Khomane.

Startup India

The #Startup India Maharashtra Yatra Bootcamp Pune Region

Research Facilities on Campus

A new FDM (Fused Deposition Modeling) technology based 3D Printer is recently added to our facilities. It's cell volume is 150mm x 145mm x 225mm with 100-400 micron layer-resolution. We can process a range of materials on it, such as PLA, TPU, PETG, ABS, PC-ABS composite, Nylon and wood-infill, carbon-fiber-infill, metal-infill etc. This enables our students to do prototyping and make functional parts as well. Research Facilities @ Dept. of Mech. Engineering

Research Facilities @ Dept. of Mech. Engineering

Research Facilities @ Dept. of Electrical Engineering

Research Facilities @ Dept. of E&TC Engineering

Proposals Submitted to Funding Agencies

PRE-PROPOSALS SUBMITTED TO RGSTC, MUMBAI 2019-20
Proposal No.	Title of Proposal	Department	Principal Investigator	Amount
1.	Setting up Technology Incubation Center at VPKBIET Baramati.	Mechanical Engg.	Dr. Sachin M.Bhosle	78 Lakh
2.	IOT based Technology Awareness for School children in Rural Areas around 50 Kms from Baramati.	Mechanical Engg.	Dr. Sachin M.Bhosle	30 Lakh
3.	Study of Microbially induced Corrosion of Stainless Steel and Release of Metal Ions in Dairy Industry.	Mechanical Engg. & Civil Engg.	Dr. Shirish C. Bali Dr. Ravindra J. Patil	24.15 Lakh
4.	Effect of Water Soluble Cutting Oil Fluids on Corrosion Behavior of Ductile Cast Iron.	Mechanical Engg. & Civil Engg.	Dr. Shirish C. Bali Dr. Ravindra J. Patil	16.55 Lakh
5.	Solar energy driven pesticide flow repellent helmet for farmers.	Mechanical Engg.	Dr. Vipin B. Gawande	05 Lakh
6.	Production of Construction Bricks from Agriculture Waste and unused Plastic.	Mechanical Engg.	Dr. Vipin B. Gawande	05 Lakh
7.	Hands on Training Program on ‘3D Modeling’ for Skill Development of Students From Rural Areas.	Mechanical Engg.	Mr. Akshay A. Bhapkar	1.1 Lakh
8.	Awareness And Hands On Training On 3D Printing For Skill Development Of Junior College Students From Rural Areas.	Mechanical Engg.	Mr. Prasad U. Galande	4.75 Lakh
9.	Design And Development of Seed & Crop Transplanter.	Mechanical Engg.	Mr. Hanumant P. Borate	1.5 Lakh
10.	Empowerment of SC and ST Women by goat farming.	Mechanical Engg.	Mr. Pravin V. Dhandore	5.0 Lakh
11.	Design And Development of Decorticator For Fiber Extraction From Pseudostem.	Mechanical Engg.	Mr. Keshav M. Jadhav	5.0 Lakh
12.	Designing a system for conduction of real time experiments through IoT.	Mechanical Engg.	Ms. Mona S. Yadav	20 Lakh
13.	Air monitoring for reducing pollution by analyzing emission absorption through various plant.	Mechanical Engg.	Mr. Kehav M. Jadhav Ms. Mona S. Yadav	15 Lakh
14.	Design and Development of Scythe	Mechanical Engg.	Mr. Shrinivas V. Shelge	1.0 Lakh
15.	Eco-friendly Semi-Automatic Spray Pumps.	Mechanical Engg.	Mrs. Prachi D. Kale	1.0 Lakh
16.	Sustainable Solution to Use Irregular Shaped Agriculture Residues for Vermicomposting and Fuel Pellets.	Mechanical Engg.	Mr. Machindra S. Gaikwad	6.75 Lakh
17.	Experimental Investigation on Composited Feedstock Derived From Sugarcane and Cow Dung/ Biogas Digester-Residues for Downdraft Gasifier.	Mechanical Engg.	Mr. Avinash H. Kolekar Mr. Machindra S. Gaikwad	11 Lakh
18.	Skill development training in rural area for self-employability through prototyping and application buildings.	Mechanical Engg.	Mr. Vishal B. Bhagwat Dr. Sachin M. Bhosle	2.5 Lakh
19.	Formulation, Development and Evaluation of Strengthening Strategy for Damaged RC Columns of Different Lengths in Structure using Fibre Reinforced polymer Composites.	Civil Engg.	Dr. Giridhar N. Narule	20 Lakh
20.	Development of Design Guidelines for Castellated Steel Beams (CSB).	Civil Engg.	Dr. Samadhan G. Morkhade	9.7 Lakh
21.	Applications Of Smart Materials And Equipments for Life Assessment And Structural Health Monitoring Of Existing Structures.	Civil Engg.	Dr. Chittranjan B. Nayak	20 Lakh
22.	Control of corrosion in agricultural equipments using aluminium coating.	Civil Engg.	Dr. Ravindra J. Patil Dr. Shirish C. Bali	17.10 lakh
23.	Propagation of Agro-Tourism Activity Among Farmers To Have More Income Sources And To Have Economic Development Of A Region.	Civil Engg.	Mr. Dilip G. Patil	4.5 Lakh
24.	Water Quality Assessment of Nira River.	Civil Engg.	Ms. Snehal R. Deshmukh	5.5 Lakh
25.	Experimental Study on Stabilization of Black Cotton Soil with Fly Ash, Molasses and Terra-Zyme.	Civil Engg.	Ms. Jyoti C. Bhong	40,000/-
26.	Ground Water Recharging system through water from thin air.	Civil Engg.	Ms. Pallavi A. Bokey	5.0 Lakh
27.	Effect of elevated temperature on high strength concrete manufactured by using Fly ash and red mud.	Civil Engg.	Mr. Kaustubh V. Raut	2.5 lakh
28.	Design of Sewerage System For Lakadi Village, Baramati	Civil Engg.	Mr. Dhiraj D. Ahiwale	13.0 lakh
29.	Light transmitting concrete: An Innovation towards the save of Environmental squalor.	Civil Engg.	Mr. Umesh T. Jagdale	5.0 lakh
30.	Smart Parking System: A Deep Learning Approach.	IT	Mr. Dinesh A. Zende	5 Lakh
31.	IOT and Machine Learning Based Smart Monitoring System for Sugarcane Crop Growth.	IT	Mr. Avinash Kokare Mrs. Komal Jadhav	1.57 lakh
32.	Face Spoofing Detection in Face Recognition.	IT	Mr. Santosh Shinde Mr. Keshav Bhagwat	80,000/-
33.	To Develop and Implement Face, Finger and Eye Expression based System for Public Voting Through IOT. D	Computer Engg.	r. Chaitanya Kulkarni	1.0 Lakh
34.	To design and implement Public Safety, Transportation & Consumer Services through IoT based system.	Computer Engg.	Dr. Chaitanya Kulkarni	52.500/-
35.	Grapes Disease Detection with CNN in Deep Learning.	Computer Engg.	Mr. Digambar M. Padulkar	20.0 Lakh
36.	Eleptic Curve Cryptography System with Blockchain for Agriculture Supply Chain Management.	Computer Engg.	Mr. Digambar M. Padulkar	25.0 Lakh
37.	Development of Portable Milk Flow cum Analyzer Meter for Small Dairy Farms.	E & TC Engg.	Dr. Rajveer K. Shastri	7.5 Lakh
38.	New Approach Towards Sustainable Development for Composting of Domestic Organic Garbage by using Microbes.	General Science	Dr. Nitin A. Jadhav	15.0 Lakh
			Total Amount:-	4,73,09500

PROPOSALS SUBMITTED TO UNIVERSITY OF PUNE Under QIP_SEMINAR/WORKSHOP GRANT 2019-20
Title of Proposal	Investigator	Department	Amount	Remarks
SPPU_State Level Seminar on Scientific Communication	Dr. S.M. Bhosle	Mechanical Engg.	Rs.60,000/-	Proposal # VPKBIET/SPPU/08/2019/567-A Submitted on05/08/2019
SPPU_National level Seminar on Damage detection strategy of structures using smart materials:Theory and Practice	Dr. C. B. Nayak	Civil Engg.	Rs.75,500/-	Proposal # VPKBIET/SPPU/08/2019/567-A Submitted on 05/08/2019
SPPU_State Level Solar Photovoltaic System Design, installation & Business opportunities.	Nikhil Vaidya & P.N.Jaiswal	Electrical Engg.	Rs.67,000/-	Proposal # VPKBIET/SPPU/08/2019/567-A Submitted on 14/08/2019
PROPOSALS SUBMITTED TO AICTE New Delhi Under AQIS GRANT 2019-20
Title of Proposal	Investigator	Department	Amount	Remarks
NewGen Innovation & Entrepreneurship Development Centre (NewGen I-EDC)	Dr. S.M. Bhosle	Mechanical Engg	Rs.2.87 Cr.	Submitted on 13/07/2019
AICTE_MODROBS_Transformation/Make-over of Conventional Machine Shop into Advanced Manufacturing Centre	Dr. S.M. Bhosle	Mechanical Engg	Rs.27.18 Lakhs	Submitted on 26/08/2019
PROPOSALS SUBMITTED TO UNIVERSITY OF PUNE Under UNIVERSITY RESEARCH GRANT SCHEME 2018-20
Title of Proposal	Investigator	Department	Amount	Remarks
Experimental investigation of nanotextured titanium surfaces for orthopedic implant applications	Dr. S. M. Bhosle	Mechanical Engg.	Rs.11.2 Lakh	Proposal # 18TEC000327 Submitted on 29/08/2018 IT was shortlisted for second round but due to sort of fund, institute didn’t allow to go ahead.
Design and development of plant phenotyping system using image processing for precision agriculture	Dr. R. K. Shastri	Electronics & Telecommunication Engg.	Rs.11.35 Lakh	Proposal # 18TEC000546 Submitted on10/09/2018
PROPOSALS SUBMITTED TO DST_SERB Under EARLY CAREER RESEARCH SCHEME 2018
Title of Proposal	Investigator	Department	Amount	Remarks
Structure Texture and Morphology Modulation of Working Electrode for fabrication of EfficientPerovskite Sensitized Solar Cells (PSSC)	Dr. Nitin Jadhav	Chemistry	Rs.36.70 Lakh	File # ECR/2018/002790/CS (Submitted online on 17th Aug 2018)
Experimental Investigation and Parametric Study for Failure Analysis of High Strength SteelCastellated Beams.	Dr. Samadhan Morkhade	Civil Engg	Rs.14.80 Lakh	File No : ECR/2018/000848/ES (Submitted online on 13th Aug 2018)
PROPOSALS SUBMITTED TO UNIVERSITY OF PUNE Under UNIVERSITY RESEARCH GRANT SCHEME 2017-19
Title of Proposal	Faculty	Date of application	Tentative Amount Rs.
Experimental investigation of nanotextured titanium surfaces for orthopedic implant applications	Dr. S. M. Bhosle (Mechanical Engg)	Submitted on 23/11/2017	Rs. 2.97 Lakh
Experimental Investigation of composite feedstock derived from sugarcane residues and cow dung / biogas digester residues for downdraft gasifier	Prof. A.H.Kolekar (Mechanical Engg.)	Submitted on 27/11/2017	Rs. 3.03 Lakh
Experimental Investigation of Multi Cylinder Spark Ignition Engine for Gaseous Fuels	Dr. P. R. Chitragar (Mechanical Engg.)	Submitted on 27/11/2017	Rs. 3.0 Lakh
Experimental Investigation and Failure Analysis of Femoral bone implant	Prof.S.V.Shelge (Mechanical Engg.)	Submitted on 30/11/2017	Rs. 2.97 Lakh
Performance analysis of multi tube heat exchanger for viscous fluid application	Prof. K. M. Jadhav (Mechanical Engg.)	Submitted 30/11/2017	Rs. 2.24 Lakh
National Level Workshop - Steel Design Bridging the Gaps: Theory and Practice.	Dr. Sharad Ghodke (Civil Engg.)	Submitted and Sanction by University of Pune	Rs. 80,400/-
State Level Workshop – Application of Power Electronics to Power Systems.	Dr. Mohan Thakare (Electrical Engg.)	Submitted and Sanction by University of Pune	Rs. 44,00/-
A Systematic Approach for the Design, fabrication, and Testing of Microstrip Antennas Using Inkjet Printing Technology	Mr. Rohit Piske (Electronics and Telecommunication)	Submitted on 27/11/2017	-
Parallel Implementation of Anisotropic Diffusion Algorithm for De-speckling of Ultrasound Video Images	Mr. Shrikrishna Kolhar (Electronics and Telecommunication)	Submitted on 27/11/2017	-
An IoT Enabled Vehicular Emergency System	Mr. Santosh Kare (IT Engg.)	Submitted on 27/11/2017	-
Automated Quantification of Diabetic Retinopathy(DR) Hard Exudate using Digital Image Processing	Mr. Devidas Kushnure (Electronics and Telecommunication)	Submitted on 27/11/2017	-
Quantification and Identification of Huntington Disease in Brain using Digital Image Processing	Mr. Vinay Nagalkar (Electronics and Telecommunication)	Submitted on 27/11/2017	-
Cardiac Arrhythmia Detection and Classification using Machine Learning Techniques	Mr. Sachin Trankatwar (Electronics and Telecommunication)	Submitted on 27/11/2017	-
Design of Ultra Compact low power Rectenna for Wireless Energy Harvesting	Mr. Madan Jadhav (Electronics and Telecommunication)	Submitted on 27/11/2017	-
A Novel approach towards Personal Health Information Management System (PHIS) based on SOA	Santosh Shinde Computer Engineering (IT Dept.)	Submitted on 27/11/2017	-
Hybrid Based Video Watermarking for Video Security	Mr. Manoj Shelar (Computer Engineering)	Submitted on 27/11/2017	-
Detection of Plant Disease using Image Processing	Mr. Rajkumar Panchal(Computer Engineering)	Submitted on 27/11/2017	-
Finger Gesture Pattern recognition based security system using dynamic hand gestures	Mr. Deepak Gaikwad Computer Engineering (IT Dept.)	Submitted on 27/11/2017	-
Design, Analysis and Prototyping of Axial Flux Machines	Mrs. Shreemanti Rokade (Electrical Engineeing)	Submitted on 27/11/2017	-
An approach towards Text Detection from complex images using Morphological Techniques	Mr. Venkatesh Rampurkar (Computer Engineering)	Submitted on 27/11/2017	-
Vector Control of Three phase Induction Motor	Mr. Rohit Tarde (Electrical Engineering)	Submitted on 27/11/2017	-
FPGA Implementation of Pipeline based Integer Wavelet Transform for Video Compression	Mr. Ajinkya Bankar (Electronics and Telecommunication)	Submitted on 27/11/2017	-
Automatic Question Generation System	Mr. Avinash Kokare (IT Dept.)	Submitted on 27/11/2017	-
Strength Behavior of the Fiber Reinforced Polymer Composite confined rectangular concrete column with variable corner radius.	Mr. Giridhar Naurle (Civil Engineering)	Submitted on 27/11/2017	-
Automatic Determination of number of cluster for NMKFC Means Algorithms on Image Segmentation Engineering	Mr. Pradip Paithane (Computer Engineering)	Submitted on 27/11/2017	-
Single Phase Bidirectional Inverter with Two Buck/Boost MPPT’s for dc- distribution applications	Mr. Govind Devsuth (Electrical Engineering)	Submitted on 27/11/2017	-
Power Device Based high Efficiency Solor Micro Inverter for Home Applications	Dr. Sudhir Lande (Electronics & Telecommunication)	Submitted on 27/11/2017	-
An Electroencephalogram(EEG) Based Bio-metrics: A Human- Computer Interaction(HCI0 Approach	Shashank Biradar (Electronics & Telecommunication)	Submitted on 27/11/2017	-
Vibration response analysis of Particle Damper	Mr. Suraj Kumbhar (Mechanical Engg.)	Submitted on 27/11/2017	-
Nutritional Diet Suggestion System for Individual	Mr. Prashant Raut (Computer Engg.)	Submitted on 27/11/2017	-
Yoga recommendation for personal health care using Machine Learning Techniques	Mr. rajaram Ambole (Computer Engg.)	Submitted on 27/11/2017	-
To study awareness and attitude of approved engineering professionals towards e-resources from engineering instates affiliated to SPPU wrt Pune district	Mr. Chandrakant Shete (Library and Information Science )	Submitted on 27/11/2017	-
Effect of road accessibility to property and road infrastructure on property value	Mr. Dilip Patil (Civil Engg.)	Submitted on 27/11/2017	-
Fractional calculus and its application	Mrs. Gauri Bhoite (Engineering Sciences)	Submitted on 27/11/2017	-
Engineering applications of Sumudu Transform	Mr. Deepak Sonawane (Engineering Sciences)	Submitted on 27/11/2017	-
Laplace Transform and its applications	Dr. Anil Hiwarekar (Engineering Sciences)	Submitted on 27/11/2017	-
Study of non linear optical phenomenon using laser	Dr. Nirmal Sahuji (Engineering Sciences)	Submitted on 27/11/2017	-
Investigation of harmful heavy metals like lead and mercury in various samples	Dr. Aparna Sajjan (Engineering Sciences)	Submitted on 27/11/2017	-
Strength and damage evaluation of fly ash based geopolymer concrete using PZT sensor	Mr. Umesh Jagdale (Civil Engg.)	Submitted on 27/11/2017	-
Embedded expansion brillouin Sensor for monitoring corrosion of reinforcement in concrete structure	Mr. Chittaranjan Nayak (Civil Engg.)	Submitted on 27/11/2017	-
Embedded expansion brillouin Sensor for monitoring corrosion of reinforcement in concrete structure	Mr. Chittaranjan Nayak (Civil Engg.)	Submitted on 27/11/2017	-
Cancer Detection with Deep Learning	Mr. Digambar Padulkar (Computer Engg.)	Submitted on 27/11/2017	-
Experimental Investigation of High Strength concrete using crushed sand	Mr. Rushikesh Khartode (Civil Engg.)	Submitted on 27/11/2017	-
Experimental Study of bending behavior of hybrid high performance steel beams.	Dr. Samadhan Morkhade (Civil Engg.)	Submitted on 27/11/2017	-
Experimental Investigation and failure analysis of Femoral bone implant	Mr. Shrinivas Shelge (Mechanical Engg.)	Submitted on 27/11/2017	-
Parametric Optimization for Photochemical Machining of Cupro-Nickel and Red-Brass	Mr. H.P. Borate (Mechanical Engg.)	Submitted on 27/11/2017	-
Experimental Investigation of Magneto sensitive vibration isolator	Mr. Pravin Dhandore (Mechanical Engg.)	Submitted on 27/11/2017	-
Genetic Algorithm Assisted experimental investigation of centrifigual air compression for surge control	Ms. Mona Yadav (Mechanical Engg.)	Submitted on 27/11/2017	-
Design and Performance Analysis of Free Space Optical communication link	Mr. S. S. Jagadale (Electronics & Telecommunication Engg.)	Submitted on 27/11/2017	-
STATUS REPORT - FUNDING PROPOSALS 2017
Title of Proposal	Faculty	Date of application	Tentative Amount Rs.	Specific Scheme and Funding Agency
Smart Agro-Engineering Incubation Center	Principal & Dr. S.M. Bhosle	28th Sept 2017 (Not sanctioned)	9.38 Cr	AIM -NITI Aayog, Govt of India (Unique Identification Code # 25641616)
Bioinspired Nanotextured Surfaces for Titanium Orthopedic Implants	Dr. S.M. Bhosle	Submitted on 03rd Oct 2017 (Scheme discontinued by GOI)	178.31 Lacs	Project Executive Summary Submitted to Nanomission DST – Govt of India (Acknowledgement #4671)
Study the effect of applied stresses on the diffusion kinetics of low temp sensititsation and stress corrosion cracking behaviors of type 304L & 304 LN stainless steel.	Dr. S. C. Bali	Submitted 20th July 2017	Rs. 49.65 Lacs	DST-ECR
IPR workshop	Dr. S. B. Lande	10th March 2017	Rs. 3 Lacs	DEiTY, Ministry of Communication and IT (Approved)
Advance Rapid PCB Prototyping Lab	Dr. R. K. Shastri	Submitted in Yr 2016-17 but Not Sanctioned	Rs. 20 Lacs	AQIS – MODROB 2016-17
Techno economics design and control of hybrid renewable energy system with communication network	Dr. R. K. Shastri	Submitted in Yr 2016-17 but Not Sanctioned	Rs. 7 Lacs	Faculty Development Program, AQIS -2016-17
Nature inspired energy-efficient communication system for 5G networks (GreenNet) Project partner: University of Tromoso, Norway.	Dr. Sanjaykumar Biswash	Submitted on 14th Sept 2017 (Left Institute)	Rs. 1.5 Cr	European Commission Project (Maricuri H2020 Project)
Usability Engineering of Social and Psychological Measurement for Optimized Project Scheduling in the Industry.	Dr. D. B. Hanchate	Submitted but Not Sanctioned	Rs. 18 Lacs	RPS, AQIS 2016-17
Sensitivity Analysis of Uncertainties associated with PAN evaporation in SEMI-ARID areas facing data scarcity	Dr. L.S. Pammar S	Submitted but Not Sanctioned	Rs. 18 Lacs	DST – SYST
Data Mining using Fixed Point Theory	Dr. G.A. Dhanorkar S	Submitted 12th Oct 2017	Rs. 3.60 Lacs	CSIR/NBHM
Analysis of Lead and Mercury in Soil and Water Samples by Electro-Analytical Methods.	Dr. A.G. Sajjan	Submitted preliminary proposal on 19th Sept 2017	Rs. 15 Lakh	DST
Modification of solid polymer electrolyte and working electrode for Fabrication of Perovskite Sensitized Solar Cells	Dr. N. A. Jadhav	Submitted (Shortlisted for Second Round)	Rs. 22.46 Lakh	DST-SERB

PROPOSALS SUBMITTED TO AICTE Under AQIS 2017-18
Title of Proposal	Faculty	Date of application	Tentative Amount Rs.	Specific Scheme and Funding Agency
Program Centre for Higher and International Education Facilitation (PRERNA)	Dr. S. M. Bhosle (Mechanical Engg)	Submitted on 29/11/2017	Rs. 10 Lakh	AICTE_AQIS 2017-18
Skill and Personality Development Center for SC/ST Student (SPDP)	Dr. S. B. Lande	Submitted on 26/11/2017	Rs. 24.96 Lakh	AICTE_AQIS 2017-18
Development of Quality of Experience (QoE) by Routing Protocol for Mobile Ad-hoc Networks (RPS)	Dr. Dhirendrakumar Sharma	Submitted on 30/11/2017	Rs. 7.95 Lakh	AICTE_AQIS 2017-18
Recent Advances in Wireless Communications – STTP	Dr. S. B. Lande	Submitted on 26/11/2017	Rs. 5 Lakh	AICTE_AQIS 2017-18
Experimental Investigation and Parametric Study for Failure Analysis of High Strength Steel Cellular/Castellated Beams (RPS)	Dr. S. Morkhade	Submitted on 28/11/2017	Rs. 24.96 Lakh	AICTE_AQIS 2017-18
GRAPH THEORY AND APPLICATIONS (STTP)	Prof. Zende D. A.	Submitted on 28/11/2017	Rs. 4.5 Lakh	AICTE_AQIS 2017-18
Mathematics for Engineers and Effective Use of Soft Tools (FDP)	Dr. A. P. Hiwarekar	Submitted on 30/11/2017	Rs. 7 Lakh	AICTE_AQIS 2017-18
Modernization of Machine Shop by addition of CNC (MODROB)	Dr. C. S. Pathak	Submitted on 29/11/2017	Rs. 19.11 Lakh	AICTE_AQIS 2017-18
Modernization of Concrete Technology Laboratory and Removal of Obsolescence (MODROB)	Prof. G. N. Narule S	Submitted on 30/11/2017	Rs. 20 Lakh	AICTE_AQIS 2017-18
Analysis of Fracture Toughness and Fatigue Life of 5086-H32 Aluminium alloy weld joint (RPS)	Dr. C. S. Pathak	Submitted on 30/11/2017	Rs. 25 Lakh	AICTE_AQIS 2017-18

APPLICATIONS SUBMITTED TO SUMMER RESEARCH FELLOWSHIP Under INDIAN ACADEMIES OF SCIENCES - 2018 Indian Academy of Sciences Summer Research Fellowship Program 2018
Investigator	Department	Remarks
Kare S. S. Swami S. A. Kokare R.B. Kokare A. J. Gaikwad D. S.	Information Technology	Submitted Not-selected
Kshitija Upadhyay Yashoda Sakhare Komal Jadhav Sahil Shah	Computer Engg	Submitted Not-selected
Tarade Rohit Nikhil Sardar	Electrical Engg	Submitted Not-selected
Shatanu Jagdale Shashank Biradar	ENTC	Submitted Not-selected
Mona Yadav	Mechanical Engg.	Submitted- Selected at IIT Guwahati
Bhapkar Akshay Kumbhar Suraj Prasad Galande	Mechanical Engg.	Submitted Not-selected

NIRF 2020 Applications Data

NIRF 2020 Application (Engineering Category)

NIRF 2020 Application (Overall Category)

R & D Cell

Objectives

R & D Cell Structure

Research & Development Committee Composition

Funded Projects and Grants

Grant Received under Sponsored Research Projects: 2019-2020

Grant Received under BCUD Sponsored Research Projects: 2016-2018

Grant Received under BCUD Sponsored Research Projects: 2014-2016

Grant Received under BCUD Sponsored Research Projects: 2013-15

Grant Received under BCUD Sponsored Research Projects: 2012-14

Grant Received from AICTE for the following MODROB Project: 2012-13

Grant Received for Seminars & Workshops (Year 2019-20)

Grant Received for Seminars & Workshops under BCUD, SPPU,Pune (Year 2017-18)

Grant Received for Seminars & Workshops under BCUD, SPPU,Pune (Year 2013-16)

QIP Equipments

Travel Grant Received

Summary

Recipients of Summer Research Fellowships

Profile- Dean R & D

Dr. Sachin Bhosle

Brief Profile :

Research Areas and Skills :

Awards and Recognitions :

Grant/Funding Received :

Peer-Reviewed Journal Publication :

Preceedings, Oral & Poster Presentations at International Conferences :

Course Certifications & Trainings :

Faculty Publications

Publications Summary

Civil Engineering

Electronics & Telecommunication Engineering

Civil Engineering

Electrical Engineering

Mechanical Engineering

First Year Engineering

Mechanical Engineering

Electronics & Telecommunication Engineering

Information Technology

Civil Engineering

First Year Engineering

Mechanical Engineering

Information Technology

Civil Engineering

First Year Engineering

Mechanical Engineering

Electronics and Telecommunication Engineering

Civil Engineering

Information Technology

First Year Engineering

Mechanical Engineering

Electronics and Telecommunication Engineering

Civil Engineering

First Year Engineering

Mechanical Engineering

Computer Engineering

Information Technology

Electronics and Telecommunication Engineering

Civil Engineering

First Year Engineering

Mechanical Engineering

Information Technology

Electronics and Telecommunication Engineering

Civil Engineering

First Year Engineering

Patents Applications

Workshop/ Seminar/Conference/STTP/FEP/Exhibition attended by faculty

Institutional Social Responsibility

IPR Training Programme

Faculty deputation @ PhD Research

Categorization of UG Projects

Categorization of UG Projects (2019-20) @ VPKBIET

Categorization of UG Projects (2019-20) @ VPKBIET

Demostrates variety of Projects with stated project-outcomes

Students Success @ Project Competitions

"NAVONMESH-2020",AIC-ADT Baramati Foundation.

About Avishkar Competition

Avishkar Competition 2019-20 (First Round Result)

Computer Engineering

Civil Engineering

Mechanical Engineering

Participation in SPPU's AVISHKAR 2019 Competition" (A State Level Project Competition).
Registrations for First Round: